Tried this fw: https://www.candelatech.com/downloads/firmware-2-ct-full-community-21.bin Used ath10k driver as there is no ct driver for 5.4 yet.
Same as with QCA firmware On 01/11/2019, Ben Greear <[email protected]> wrote: > On 11/1/19 10:03 AM, Tom Psyborg wrote: >> Hi >> >> Is there a way to run monitor mode interface independent on STA/AP >> interface presence or their state? >> I am using airodump-ng/airmon-ng and I've noticed that while mon >> interface is brought up airodump-ng is unable to find any beacons >> unless sta interface is brought down. That is with QCA9880 devices, >> while with QCA9377 airodump-ng only finds beacons if the sta interface >> is associated to an AP. >> Does this need firmware change to work or driver changes are sufficient? >> > > I would expect it to work. Have you tried -ct firmware on 9880 in this > manner? > > Thanks, > Ben > > -- > Ben Greear <[email protected]> > Candela Technologies Inc http://www.candelatech.com > > _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
