On 12/12/19 9:14 AM, [email protected] wrote:
From: Ben Greear <[email protected]>
Do not ignore 0 txpower setting unless the vif is of type p2p.
My patch has problems I think: secondary stations also have un-init
txpower when they are first built and start scanning.
So, I'm going to try setting txpower to -1 in mac80211 and use that
to mean 'unset'.
Thanks,
Ben
This should fix regression in:
commit 88407beb1b1462f706a1950a355fd086e1c450b6
Author: Ryan Hsu <[email protected]>
Date: Tue Dec 13 14:55:19 2016 -0800
ath10k: fix incorrect txpower set by P2P_DEVICE interface
Tested (without p2p in use) on 9984 with ath10k-ct firmware, but I don't think
this is firmware specific.
Signed-off-by: Ben Greear <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c
b/drivers/net/wireless/ath/ath10k/mac.c
index 289d03da14b2..1c5e1b5570f8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5902,11 +5902,18 @@ static int ath10k_mac_txpower_recalc(struct ath10k *ar)
{
struct ath10k_vif *arvif;
int ret, txpower = -1;
+ int p2p_st;
+
+ p2p_st = ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_P2P_DEVICE);
lockdep_assert_held(&ar->conf_mutex);
list_for_each_entry(arvif, &ar->arvifs, list) {
- if (arvif->txpower <= 0)
+ /* p2p may not initialize txpower, and we should ignore it
+ * in that case.
+ */
+ if ((arvif->txpower < 0) ||
+ ((arvif->txpower == 0) && (arvif->vdev_subtype == p2p_st)))
continue;
if (txpower == -1)
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
