When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very esay to break the 1st restart work and lead
recovery fail.

Add a ref count to allow only one restart work running untill
device successfully recovered.

This patch only effect sdio chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <[email protected]>
---
 drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++
 drivers/net/wireless/ath/ath10k/core.h | 2 ++
 drivers/net/wireless/ath/ath10k/mac.c  | 1 +
 3 files changed, 11 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c 
b/drivers/net/wireless/ath/ath10k/core.c
index 91f131b87efc..4e0e8c86bdd4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2199,6 +2199,14 @@ static void ath10k_core_restart(struct work_struct *work)
 {
        struct ath10k *ar = container_of(work, struct ath10k, restart_work);
        int ret;
+       int restart_count;
+
+       restart_count = atomic_inc_and_test(&ar->restart_count);
+       if (restart_count > 1) {
+               ath10k_warn(ar, "can not restart, count: %d\n", restart_count);
+               atomic_dec(&ar->restart_count);
+               return;
+       }
 
        set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
 
diff --git a/drivers/net/wireless/ath/ath10k/core.h 
b/drivers/net/wireless/ath/ath10k/core.h
index e57b2e7235e3..810c99f2dc0e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -982,6 +982,8 @@ struct ath10k {
        /* protected by conf_mutex */
        u8 ps_state_enable;
 
+       atomic_t restart_count;
+
        bool nlo_enabled;
        bool p2p;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c 
b/drivers/net/wireless/ath/ath10k/mac.c
index 3856edba7915..bc1574145e66 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7208,6 +7208,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw 
*hw,
                ath10k_info(ar, "device successfully recovered\n");
                ar->state = ATH10K_STATE_ON;
                ieee80211_wake_queues(ar->hw);
+               atomic_dec(&ar->restart_count);
        }
 
        mutex_unlock(&ar->conf_mutex);
-- 
2.23.0

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

Reply via email to