This adds new dt entries qcom,coexist-support and qcom,coexist-gpio-pin which will be used by ath10k driver to identify coex support of a hardware and notify wifi firmware the gpio pin number. This pin number information is needed for the hardware QCA4019.
Signed-off-by: Tamizh Chelvam <[email protected]> --- Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 616c877..71bf91f 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -91,6 +91,11 @@ Optional properties: - qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically mapped msa region. +- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex + support by the hardware. +- qcom,coexist-gpio-pin : gpio pin number information to support coex + which will be used by wifi firmware. + Example (to supply PCI based wifi block details): In this example, the node is defined as child node of the PCI controller. @@ -159,6 +164,8 @@ wifi0: wifi@a000000 { qcom,msi_addr = <0x0b006040>; qcom,msi_base = <0x40>; qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ]; + qcom,coexist-support = <1>; + qcom,coexist-gpio-pin = <0x33>; }; Example (to supply wcn3990 SoC wifi block details): -- 1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
