Hi, this is a set of board.bin files for the Aruba AP-303, which I wish to be added to the ath10k-firmware repository.
As per the current "Submitting board files" guidelines [1]:
* description for what hardware this is:
- it is a IPQ4029 based board
- one QCA40xx radio is used as 2.4 GHz radio
- one QCA40xx radio is used as 5 GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- all files were extracted from official vendor firmware which was on
the device
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- qca4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303
* sha256sum of each new board file to add
- bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303.bin
- deeeee5b1408681c68699d068eea297aa970a64fef4f04ad4fc30413e186d67f
- bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303.bin
- b636eb18ed7c2df6a6f2567009bf95c7c2252feea146b4f05d8757514fe1d6e1
* attach the actual board file (board.bin)
- the name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
[1] <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
Best wishes
David
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Aruba-AP-303.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Aruba-AP-303.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
