Sowmiya Sree Elavalagan <[email protected]> wrote: > Set right channel frequencies in VHT160 mode according to the VHT160 > interoperability workaround added as part of IEEE Std 802.11™-2016 in > "Table 9-252—VHT Operation Information subfields", band_center_freq2 > corresponds to CCFS1 in Table 9-253. Previous implementation > (band_center_freq2 = 0 for VHT160) is only deprecated. > > Enable VHT80+80 mode and set the proper peer RX nss value for VHT160 and > VHT80+80 mode. > > Based on patches by Sebastian Gottschall: > > https://lkml.kernel.org/r/[email protected] > > https://lkml.kernel.org/r/[email protected] > > Tested: qca9984 with firmware ver 10.4-3.10-00047 > > Co-developed-by: Sebastian Gottschall <[email protected]> > Signed-off-by: Sebastian Gottschall <[email protected]> > Co-developed-by: Rick Wu <[email protected]> > Signed-off-by: Rick Wu <[email protected]> > Signed-off-by: Lei Wang <[email protected]> > Signed-off-by: Sowmiya Sree Elavalagan <[email protected]> > Signed-off-by: Kalle Valo <[email protected]>
2 patches applied to ath-next branch of ath.git, thanks. 3db24065c2c8 ath10k: enable VHT160 and VHT80+80 modes 795def8b14ff ath10k: enable radar detection in secondary segment -- https://patchwork.kernel.org/patch/11465505/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
