Hi, Currently this device is in the process of being added to OpenWRT (https://github.com/openwrt/openwrt/pull/2841).
To answer the questions on the wiki page: * description for what hardware this is: - it is a QCA401x based board (AP-DK01.1-C2 based) - one QCA40xx radio is used as 2.4GHz radio - one QCA40xx radio is used as 5GHz radio * origin of the board file (did you create it yourself or where you downloaded) - Extracted from factory firmware * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=cellc,rtl30vw' BoardMD5: 54f78d6348ebdd1857ba3d42407bd7e4 BoardNames: 'bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw' BoardMD5: 396013851bb5c28c67f60f08ca3675b5 NOTE: "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw" file have the same md5 sum as "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=AVM-FRITZBox-4040". In first message i sent one bin without duplicate but Christian Lamparter on OpenWrt github ask me for resend with both bin files. * attach the actual board file (board.bin) Best regards, Pawel Dembicki
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=cellc,rtl30vw.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=cellc,rtl30vw.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
