On 3/27/20 10:31 AM, Robert Marko wrote:
> Enable advertising support for 5G channels: 32, 68 and 96.
> These channels are legal and available for use in ETSI countries.
> So lets advertise these and they will be available in accordance with the
> regulatory domain used.
>
> Signed-off-by: Robert Marko <[email protected]>
> Cc: Luka Perkov <[email protected]>
> ---
> drivers/net/wireless/ath/ath10k/core.h | 2 +-
> drivers/net/wireless/ath/ath10k/mac.c | 3 +++
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath10k/core.h
> b/drivers/net/wireless/ath/ath10k/core.h
> index 5101bf2b5b15..480efaa1278c 100644
> --- a/drivers/net/wireless/ath/ath10k/core.h
> +++ b/drivers/net/wireless/ath/ath10k/core.h
> @@ -37,7 +37,7 @@
> #define WMI_READY_TIMEOUT (5 * HZ)
> #define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ)
> #define ATH10K_CONNECTION_LOSS_HZ (3 * HZ)
> -#define ATH10K_NUM_CHANS 41
> +#define ATH10K_NUM_CHANS 44
> #define ATH10K_MAX_5G_CHAN 173
>
> /* Antenna noise floor */
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c
> b/drivers/net/wireless/ath/ath10k/mac.c
> index 7fee35ff966b..f98422427b27 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -8363,6 +8363,7 @@ static const struct ieee80211_channel
> ath10k_2ghz_channels[] = {
> };
>
> static const struct ieee80211_channel ath10k_5ghz_channels[] = {
> + CHAN5G(32, 5160, 0),
> CHAN5G(36, 5180, 0),
> CHAN5G(40, 5200, 0),
> CHAN5G(44, 5220, 0),
> @@ -8371,6 +8372,8 @@ static const struct ieee80211_channel
> ath10k_5ghz_channels[] = {
> CHAN5G(56, 5280, 0),
> CHAN5G(60, 5300, 0),
> CHAN5G(64, 5320, 0),
> + CHAN5G(68, 5340, 0),
> + CHAN5G(96, 5480, 0),
> CHAN5G(100, 5500, 0),
> CHAN5G(104, 5520, 0),
> CHAN5G(108, 5540, 0),
Hi, your patch is incomplete. Mgmt frames cannot be received on channel 32,
because of the following lines in wmi.c:
/* Hardware can Rx CCK rates on 5GHz. In that case phy_mode is set to
* MODE_11B. This means phy_mode is not a reliable source for the band
* of mgmt rx.
*/
if (channel >= 1 && channel <= 14) {
status->band = NL80211_BAND_2GHZ;
} else if (channel >= 36 && channel <= ATH10K_MAX_5G_CHAN) {
status->band = NL80211_BAND_5GHZ;
} else {
/* Shouldn't happen unless list of advertised channels to
* mac80211 has been changed.
*/
WARN_ON_ONCE(1);
dev_kfree_skb(skb);
return 0;
}
Have you tested this patch?
Markus
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
