More RED bean testing:
With 5.9.0-rc5-wt-ath+ (master) and firmware and board file generated from
https://github.com/8devices/qcacld-2.0/tree/CNSS.LEA.NRT_3.0/firmware_bin/sdio,
the firmware crashes as below:
I have changed hardware now, from:
Dell E6430 (O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader
Controller (rev 05))
to
Dell Latitude 7480 (Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card
Reader (rev 01))
This solves the issue:
mmc0: Internal clock never stabilised.
But instead, with the latest "master", I get:
[ 1567.242177] mmc0: cannot verify signal voltage switch
[ 1567.355730] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
[ 1567.371590] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
[ 1567.378627] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
[ 1567.380043] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
[ 1567.387628] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
[ 1567.387693] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
[ 1567.387757] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
[ 1567.387781] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1570.470544] ath10k_sdio mmc0:0001:1: bmi communication timeout
[ 1570.470546] ath10k_sdio mmc0:0001:1: unable to read from device
[ 1570.470547] ath10k_sdio mmc0:0001:1: could not get target info (-110)
Wrt firmware, we actually have 4 different versions to choose between, any
recommendation?
1)
Source:
https://github.com/8devices/qcacld-2.0/tree/caf-wlan/LNX.LEH.4.2.2.2/firmware/sdio
Version: LNX.LEH.4.2.2.2
Date in binary: Dec 9 2015
2)
Source:
https://github.com/kvalo/ath10k-firmware/tree/master/QCA9377/hw1.0/untested
Version: WLAN.TF.1.1.1-00061-QCATFSWPZ-1
Date in binary: Jan 11 2017
3)
Source: https://developer.qualcomm.com/hardware/qca9377-x/tools
Version: LEA.3.0_QDN_r3000017.1
Date in binary: Jul 18 2018
4)
Source:
https://github.com/8devices/qcacld-2.0/tree/CNSS.LEA.NRT_3.0/firmware_bin/sdio
Version: CNSS.LEA.NRT_3.0
Date in binary: Nov 7 2018
The kvalo/ath10k one looks promising, but comes without board file. Are
there dependencies between the firmware versions and the board files, or
can we just grab a board file from github.com/8devices and use that one
with the firmware from kvalo/ath10k-firmware?
Br,
Peter
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
