Hi, The support for this device is currently prepared for OpenWrt. This AP requires three special BDFs to get the Wi-Fi PHYs working (correctly).
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a IPQ4019 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA9888 radio is used as 5GHz radio (channel 36-64)
- one QCA40xx radio is used as 5GHz radio (channel 100-165)
* origin of the board file (did you create it yourself or where you
downloaded)
- was provided by vendor in patch send to me for the OpenWrt support
(Sun, 27 Jan 2019 22:23:37 +0800)
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- BoardNames[0]:
'bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200'
BoardLength[0]: 12064
BoardCRC32[0]: eee32a50
BoardMD5[0]: e7610d866e32b9a40e5b75d885cc22a0
- BoardNames[1]:
'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200'
BoardLength[1]: 12064
BoardCRC32[1]: a3a9dc35
BoardMD5[1]: 5c3698ba55965df0dd8bbdca7706eb5d
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Sven
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=PlasmaCloud-PA2200.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=PlasmaCloud-PA2200.bin
Description: Binary data
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
