Carl Huang <[email protected]> wrote: > ath10k assigns ath10k_mac_set_sar_specs to ath10k_ops, and > this function is called when user space application calls > NL80211_CMD_SET_SAR_SPECS. ath10k also registers SAR type, > and supported frequency ranges to wiphy so user space can > query SAR capabilities. > > This SAR power limitation is compared to regulatory txpower > and selects the minimal one to set when station is connected. > Otherwise, it delays until the station is connected. If the > station is disconnected, it returns to regulatory txpower. > > This feature is controlled by hw parameter: dynamic_sar_support. > > Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 > > Signed-off-by: Carl Huang <[email protected]> > Reviewed-by: Brian Norris <[email protected]> > Reviewed-by: Abhishek Kumar <[email protected]> > Reported-by: kernel test robot <[email protected]> > Signed-off-by: Kalle Valo <[email protected]>
This added new warnings, I fixed them in the pending branch: drivers/net/wireless/ath/ath10k/mac.c:84:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] drivers/net/wireless/ath/ath10k/mac.c:89:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] -- https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
