Use the "iw" command as root, something like this, assuming 'wlan0' is
the device name. To figure out your wireless device name, you can do 'ip
link' to see a list of interfaces and the wireless one should be pretty
obvious.
# get current txpower
$ iw dev wlan0 info | grep txpower
txpower 22.00 dBm
# set
$ iw dev wlan0 set txpower fixed 2000
$ iw dev wlan0 info | grep txpower
txpower 20.00 dBm
# set back to auto
$ iw dev wlan0 set txpower auto
Note that increasing txpower may be limited by local regulations, `iw
reg get` will show current region. There are region free patches
floating around.
Note the confusing difference in units for display (dBm), and setting
(mBm), factor of 100 difference for some reason?
See also 'man ip', 'man iw', and 'iw help | less'
On 10/22/21 07:44, Wadepohl, Wolfram wrote:
Hi,
I'm a complete newbie to linux wireless and want to know, how I can set
transmit power and antenna gain for the 8device RedBean (QCA9377-3 based)?
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
