I am preparing OpenWrt support for the ZTE MF286D router. It's based on the IPQ4019 processor.
* description of hardware
- QCA4019-based board
- QCA4019 is used as 2.4 GHz radio
- QCA4019 is used as 5 GHz radio
* origin of the board file
- Pulled from the stock firmware dump.
* IDs to be used with the board file
- bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d
md5sum: 489f0157df7d92857a8d915098c2de56
- bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d
md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376
Board file is attached.
--
Best Regards,
Pawel Dembicki
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf286d.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf286d.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
