<[email protected]> writes: > Hi, > > The support for this device was added a while ago to OpenWrt. This AP > requires two special BDFs to get the Wi-Fi PHYs working (correctly). > The bmi-board-id='s would clash with one of the the IPQ401X AP-DK > boards because QCA doesn't provide special IDs for customers and seems > to use the AP-DK board-ids in the wifi firmware to change its > behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > - it is a IPQ4019 based board > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5GHz radio > - one QCA9888 radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > - taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > - QCA4019 hw1.0 > > md5sum of each new board file to add > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200 > md5sum: e7610d866e32b9a40e5b75d885cc22a0 > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200 > md5sum: 5c3698ba55965df0dd8bbdca7706eb5d
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EAP2200 bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EAP2200 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 52 in total https://github.com/kvalo/ath10k-firmware/commit/38ebb2d24e1f5b7afa8a53eaf3c95d9b46b6b3ae -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
