<[email protected]> writes: > The support for this device was added a while ago to OpenWrt. This AP > requires two special BDFs to get the Wi-Fi PHYs working (correctly). > The bmi-board-id='s would clash with one of the IPQ401X AP-DK boards > because QCA doesn't provide special IDs for customers and seems to use > the AP-DK board-ids in the wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > l description for what hardware this is: > - It is an IPQ4018 based board. > - One QCA40xx radio is used as 2.4GHz radio > - One QCA40xx radio is used as 5GHz radio > > l origin of the board file (did you create it yourself or where you > downloaded) > - Taken from stock firmware image > > l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > - QCA4019 hw1.0 > > a7bfd8557e29620190eee3a34537b8f6 > bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin > 7bb7e9ab117c1a560dc3259f30bf5081 > bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 60 in total https://github.com/kvalo/ath10k-firmware/commit/08fccb1aed0c1693cdf04af80932d8031f949c26 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
