<[email protected]> writes: > Hi, > > The support for this device was added a while ago to OpenWrt. This AP > requires two special BDFs to get the Wi-Fi PHYs working (correctly). > The bmi-board-id='s would clash with one of the the IPQ401X AP-DK > boards because QCA doesn't provide special IDs for customers and seems > to use the AP-DK board-ids in the wifi firmware to change its > behavior. This request contains the two files for QCA4019. The QCA9888 > one will be submitted in a different request. > > Now to the questions from the wiki page [1]: > > l description for what hardware this is: > - it is a IPQ4019 based board > - one QCA4019 radio is used as 2.4GHz radio > - one QCA4019 radio is used as 5GHz radio > - an additional QCA9888 5GHz radio is attached via PCI > > l origin of the board file (did you create it yourself or where you > downloaded) > - taken from stock firmware image > > l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > - QCA4019 hw1.0 > > md5sum of each new board file to add > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000 > md5sum: e4e0c9bc1482b03b8240817b5918666c > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000 > md5sum: a4e9856757014f4591d40ce93bab3e4f
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=EnGenius-EMR5000 bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=EnGenius-EMR5000 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 62 in total https://github.com/kvalo/ath10k-firmware/commit/8f150f4a3d52415b95fbbfead8dcaff458b80332 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
