Tom Brouwer <[email protected]> writes: > Currently this device is in the process of being added to OpenWRT (See > pull request here: https://github.com/openwrt/openwrt/pull/2671). The > WiFi won't function properly without the board files from the Factory > Firmware. > > To answer the questions on the wiki page: > > * description for what hardware this is: > > - it is a QCA401x based board (factory firmware seems to inidicate > qcom-ipq40xx-ap.dk01.1) > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - Extracted from factory firmware > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=ezviz-cs-w3-wd1200g-eup > sha256sum: > c0179dab3e1eb2c6c777ab524dcfb3f032bb5f152eab03aa0d43f36b7626c16b > md5sum: aa76702704d0989794e2df86f894fbf8 > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=ezviz-cs-w3-wd1200g-eup > sha256sum: > be2f00c9205a33c8314361ef69f1bb08e69f2e51976a1876d46c2e100f73d84b > md5sum: 1177d69996614dd8f3b75993032702a4 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=ezviz-cs-w3-wd1200g-eup bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=ezviz-cs-w3-wd1200g-eup Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 68 in total https://github.com/kvalo/ath10k-firmware/commit/c07b12a2f6ea2efdeba55aa1a7c63b8295ada581 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
