"Peter Adkins" <[email protected]> writes: > In order to properly add support to OpenWrt for the Linksys WHW01 v1 (FCC ID > Q87-0333) [1], BDFs were required to be extracted from the vendor's firmware > (version 1.1.13.202617 [2]). Without these the radios did not appear to > operate correctly; the 5GHz radio was unable to scan, and when running in AP > mode, clients were unable to connect. > > The vendor firmware appears to provide a number of board files which are > installed at device power-on depending on the configured region - AU, FCC, > EU, etc. Only the FCC board files have been included here, as I'm unsure > whether all files should be submitted and whether there are any differences > (although their md5s did not match)? > > Information requested, per the wiki page [3]: > > * description for what hardware this is: > > - it is a IPQ4018 based board > - one qca4019 radio is used as 2.4GHz radio > - one qca4019 radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - Extracted from Linksys WHW01 v1 firmware (1.1.13.202617) [2] > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-whw01-v1 > md5: 92f5a223a963211d884b6211385dfa91 > - bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-whw01-v1 > md5: 5bb0357df9cf3614fe4d9db696d09e43
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-whw01-v1 bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-whw01-v1 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 86 in total https://github.com/kvalo/ath10k-firmware/commit/fb4e69fcead641ed592207b133e67f0a4c6d9dab -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
