Sven Eckelmann <[email protected]> writes: > The support for this device is currently prepared for OpenWrt. This AP > requires > three special BDFs to get the Wi-Fi PHYs working (correctly). > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4019 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA9888 radio is used as 5GHz radio (channel 36-64) > - one QCA40xx radio is used as 5GHz radio (channel 100-165) > > * origin of the board file (did you create it yourself or where you > downloaded) > > - was provided by vendor in patch send to me for the OpenWrt support > (Sun, 27 Jan 2019 22:23:37 +0800) > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - BoardNames[0]: > 'bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200' > BoardLength[0]: 12064 > BoardCRC32[0]: b5855151 > BoardMD5[0]: 271e88642c141a58e115819de756994d > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Thanks, added to QCA9888/hw2.0/board-2.bin: New: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=PlasmaCloud-PA2200 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 10 in total https://github.com/kvalo/ath10k-firmware/commit/085c231d48a7247e531e757479f6746b60a97c86 -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
