Hi, OpenWrt support for Google Wifi is under review, so I'd like to push the BDFs into the mainline board-2.bin.
Per the wiki [1]:
* description for what hardware this is
- IPQ4019-based router, with two QCA4019 radios -- one for 2.4GHz (BMI board
ID 16) and one for 5GHz (BMI board ID 21)
- The Google Wifi product (notably, this is different than the Nest Wifi)
was originally released in 2016, with a codename "Gale". It was refreshed
in 2020 with near-identical hardware [2], using the same OS but a new BDF
and new codename ("Breeze"). I include both Gale and Breeze BDFs but have
only tested the former.
* origin of the board file (did you create it yourself or where you
downloaded)
- Pulled from the factory device filesystem (version R89-13729.57.27), which
supports both the "Gale" and the (very similar) "Breeze" variants
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) +
md5sum of each new board file to add
- QCA4019 hw1.0
BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE'
BoardMD5[0]: ea35e78c88a8571201da8b75edc9b881
BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE'
BoardMD5[1]: 44cbc4ca6cb7141ba4249615f7065582
BoardNames[2]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE'
BoardMD5[2]: b4ac055b3ab67d5a6f5607a96af39a1f
BoardNames[3]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE'
BoardMD5[3]: 8b26cb285032314247304114b8ac50e7
Variant naming scheme reflects that used by other Google projects -- using a
GO(ogle) prefix, an underscore (_), and the project code name, all in caps.
Attached filenames match the IDs above, with a '.bin' suffix appended.
Regards,
Brian
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
[2] https://9to5google.com/2020/10/06/new-google-wifi-launch/
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_BREEZE.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GO_GALE.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_BREEZE.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GO_GALE.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
