Hello all!! This is my first submission, so I may need some patience to get this right! :) :)
I would like to add some board files for a device that was added a while ago to OpenWRt - the GL.iNet GL-B2200 mesh router. The device sports 3 Wi-Fi interfacesand currently uses the three board files I am submitting. * Hardware description: This device seems based on IPQ4019 / AP-DK04.1-C3. Three radios are used: - one QCA4019 radio is used for 2.4 GHZ operation - one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum - a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum * origin of the board files: These board files where provided by the manifacturer, who provided the original patch to support the device. However, the board file for the QCA9888v2 hardware needed to be fixed/re-packaged when the board DTS was modified to switch to pre-calibration. * ids to be used with the board files + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200 SHA256: bffec2b99a98ff1d2f842217ef0478c1714f9ea7f42791c2b2f47d9ed1342db6 + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200 SHA256: 952e47bae3c8b949926b75c8471fb60dffcceefec5914c0d646a8b361df79d05 + bus=pci,vendor=168c,device=0056,subsystem-vendor=0000,subsystem-device=0000,variant=GL-B2200 SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20 * attached files: The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course. Kind regards, Enrico
bin7rAx0MhQma.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200.bin
Description: Binary data
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
