Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge rising - but instead rely on Devicetree to configure it.
All Qualcomm DTSI with WCN3990 define the interrupt type as level high,
so the mismatch between DTSI and driver causes rebind issues:
$ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/unbind
$ echo 18800000.wifi > /sys/bus/platform/drivers/ath10k_snoc/bind
[ 44.763114] irq: type mismatch, failed to map hwirq-446 for
interrupt-controller@17a00000!
[ 44.763130] ath10k_snoc 18800000.wifi: error -ENXIO: IRQ index 0 not found
[ 44.763140] ath10k_snoc 18800000.wifi: failed to initialize resource: -6
Fixes: c963a683e701 ("ath10k: add resource init and deinit for WCN3990")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org>
---
Separate question is whether DTS has a proper interrupt type (level
high) configured...
---
drivers/net/wireless/ath/ath10k/snoc.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c
b/drivers/net/wireless/ath/ath10k/snoc.c
index 607e8164bf98..5576ad9fd116 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1249,13 +1249,12 @@ static void ath10k_snoc_init_napi(struct ath10k *ar)
static int ath10k_snoc_request_irq(struct ath10k *ar)
{
struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
- int irqflags = IRQF_TRIGGER_RISING;
int ret, id;
for (id = 0; id < CE_COUNT_MAX; id++) {
ret = request_irq(ar_snoc->ce_irqs[id].irq_line,
- ath10k_snoc_per_engine_handler,
- irqflags, ce_name[id], ar);
+ ath10k_snoc_per_engine_handler, 0,
+ ce_name[id], ar);
if (ret) {
ath10k_err(ar,
"failed to register IRQ handler for CE %d:
%d\n",
--
2.32.0
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
