Enrico Mioso <mrkiko...@gmail.com> writes: > I would like to add a board file for the PCI-E Wi-Fi interface present > on the GL.iNet GL-B2200 mesh router, a device added a while ago to > OpenWRt. > > * Hardware description: > > This device seems based on IPQ4019 / AP-DK04.1-C3. > Three radios are used: > - one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous > message) > - one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 > GHZ spectrum (submitted on a previous message) > - a QCA9888V2 interface connected over PCI-E to operate on higher part > of the 5 GHZ spectrum (contained in this message) > > * origin of the board files: > > The board file was provided by the manifacturer, who provided the > original patch to support the device in OpenWRt. > > * ids to be used with the board files > > + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 > SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20 > > * attached files: > > The names of the files are equal to the ID strings in the board-2.bin > files, minus the .bin extension of course.
Thanks, added to QCA9888/hw2.0/board-2.bin: New: bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 12 in total https://github.com/kvalo/ath10k-firmware/commit/b'302f5e8de61f53fd48a64455758e07700647818e' -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list firstname.lastname@example.org http://lists.infradead.org/mailman/listinfo/ath10k