Fix misspellings flagged by 'codespell'.
Signed-off-by: Jeff Johnson <quic_jjohn...@quicinc.com>
---
drivers/net/wireless/ath/ath10k/bmi.c | 4 ++--
drivers/net/wireless/ath/ath10k/ce.c | 2 +-
drivers/net/wireless/ath/ath10k/core.c | 2 +-
drivers/net/wireless/ath/ath10k/core.h | 4 ++--
drivers/net/wireless/ath/ath10k/coredump.c | 2 +-
drivers/net/wireless/ath/ath10k/coredump.h | 2 +-
drivers/net/wireless/ath/ath10k/debug.c | 2 +-
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 2 +-
drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 2 +-
drivers/net/wireless/ath/ath10k/hw.c | 6 +++---
drivers/net/wireless/ath/ath10k/mac.c | 8 ++++----
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
drivers/net/wireless/ath/ath10k/pci.h | 2 +-
drivers/net/wireless/ath/ath10k/qmi.c | 2 +-
drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +-
drivers/net/wireless/ath/ath10k/sdio.c | 2 +-
drivers/net/wireless/ath/ath10k/thermal.c | 2 +-
drivers/net/wireless/ath/ath10k/thermal.h | 2 +-
drivers/net/wireless/ath/ath10k/usb.h | 2 +-
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 4 ++--
drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.h | 14 +++++++-------
23 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c
b/drivers/net/wireless/ath/ath10k/bmi.c
index 4481ed375f55..af6546572df2 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -101,7 +101,7 @@ int ath10k_bmi_get_target_info_sdio(struct ath10k *ar,
cmd.id = __cpu_to_le32(BMI_GET_TARGET_INFO);
/* Step 1: Read 4 bytes of the target info and check if it is
- * the special sentinal version word or the first word in the
+ * the special sentinel version word or the first word in the
* version response.
*/
resplen = sizeof(u32);
@@ -111,7 +111,7 @@ int ath10k_bmi_get_target_info_sdio(struct ath10k *ar,
return ret;
}
- /* Some SDIO boards have a special sentinal byte before the real
+ /* Some SDIO boards have a special sentinel byte before the real
* version response.
*/
if (__le32_to_cpu(tmp) == TARGET_VERSION_SENTINAL) {
diff --git a/drivers/net/wireless/ath/ath10k/ce.c
b/drivers/net/wireless/ath/ath10k/ce.c
index c45c814fd122..59926227bd49 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -1323,7 +1323,7 @@ EXPORT_SYMBOL(ath10k_ce_per_engine_service);
/*
* Handler for per-engine interrupts on ALL active CEs.
* This is used in cases where the system is sharing a
- * single interrput for all CEs
+ * single interrupt for all CEs
*/
void ath10k_ce_per_engine_service_any(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index d1ac64026cb3..400f332a7ff0 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -3096,7 +3096,7 @@ int ath10k_core_start(struct ath10k *ar, enum
ath10k_firmware_mode mode,
* enabled always.
*
* We can still enable BTCOEX if firmware has the support
- * eventhough btceox_support value is
+ * even though btceox_support value is
* ATH10K_DT_BTCOEX_NOT_FOUND
*/
diff --git a/drivers/net/wireless/ath/ath10k/core.h
b/drivers/net/wireless/ath/ath10k/core.h
index d70d7d088a2b..f5de8ce8fb45 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -76,7 +76,7 @@
/* The magic used by QCA spec */
#define ATH10K_SMBIOS_BDF_EXT_MAGIC "BDF_"
-/* Default Airtime weight multipler (Tuned for multiclient performance) */
+/* Default Airtime weight multiplier (Tuned for multiclient performance) */
#define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4
#define ATH10K_MAX_RETRY_COUNT 30
@@ -857,7 +857,7 @@ enum ath10k_dev_flags {
/* Disable HW crypto engine */
ATH10K_FLAG_HW_CRYPTO_DISABLED,
- /* Bluetooth coexistance enabled */
+ /* Bluetooth coexistence enabled */
ATH10K_FLAG_BTCOEX,
/* Per Station statistics service */
diff --git a/drivers/net/wireless/ath/ath10k/coredump.c
b/drivers/net/wireless/ath/ath10k/coredump.c
index fe6b6f97a916..2d1634a890dd 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -531,7 +531,7 @@ static const struct ath10k_mem_section
qca6174_hw30_sdio_register_sections[] = {
{0x40000, 0x400A4},
- /* SI register is skiped here.
+ /* SI register is skipped here.
* Because it will cause bus hang
*
* {0x50000, 0x50018},
diff --git a/drivers/net/wireless/ath/ath10k/coredump.h
b/drivers/net/wireless/ath/ath10k/coredump.h
index 240d70515088..437b9759f05d 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.h
+++ b/drivers/net/wireless/ath/ath10k/coredump.h
@@ -125,7 +125,7 @@ enum ath10k_mem_region_type {
* To minimize the size of the array, the list must obey the format:
* '{start0,stop0},{start1,stop1},{start2,stop2}....' The values below must
* also obey to 'start0 < stop0 < start1 < stop1 < start2 < ...', otherwise
- * we may encouter error in the dump processing.
+ * we may encounter error in the dump processing.
*/
struct ath10k_mem_section {
u32 start;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c
b/drivers/net/wireless/ath/ath10k/debug.c
index 39378e3f9b2b..c861e66ef6bc 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1081,7 +1081,7 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file,
* struct available..
*/
-/* This generally cooresponds to the debugfs fw_stats file */
+/* This generally corresponds to the debugfs fw_stats file */
static const char ath10k_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_pkts_nic",
"tx_bytes_nic",
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 367539f2c370..87a3365330ff 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -498,7 +498,7 @@ static char *get_num_ampdu_subfrm_str(enum
ath10k_ampdu_subfrm_num i)
{
switch (i) {
case ATH10K_AMPDU_SUBFRM_NUM_10:
- return "upto 10";
+ return "up to 10";
case ATH10K_AMPDU_SUBFRM_NUM_20:
return "11-20";
case ATH10K_AMPDU_SUBFRM_NUM_30:
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c
b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 8a075a711b71..be02ab27a49b 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2496,7 +2496,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct
ath10k_htt *htt,
/* I have not yet seen any case where num_mpdu_ranges > 1.
* qcacld does not seem handle that case either, so we introduce the
- * same limitiation here as well.
+ * same limitation here as well.
*/
if (num_mpdu_ranges > 1)
ath10k_warn(ar,
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c
b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a19b0795c86d..bd603feb7953 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1112,7 +1112,7 @@ int ath10k_htt_tx_fetch_resp(struct ath10k *ar,
int len = 0;
int ret;
- /* Response IDs are echo-ed back only for host driver convienence
+ /* Response IDs are echo-ed back only for host driver convenience
* purposes. They aren't used for anything in the driver yet so use 0.
*/
diff --git a/drivers/net/wireless/ath/ath10k/hw.c
b/drivers/net/wireless/ath/ath10k/hw.c
index e52e41a70321..6d32b43a4da6 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -84,7 +84,7 @@ const struct ath10k_hw_regs qca99x0_regs = {
.ce5_base_address = 0x0004b400,
.ce6_base_address = 0x0004b800,
.ce7_base_address = 0x0004bc00,
- /* Note: qca99x0 supports upto 12 Copy Engines. Other than address of
+ /* Note: qca99x0 supports up to 12 Copy Engines. Other than address of
* CE0 and CE1 no other copy engine is directly referred in the code.
* It is not really necessary to assign address for newly supported
* CEs in this address table.
@@ -120,7 +120,7 @@ const struct ath10k_hw_regs qca4019_regs = {
.ce5_base_address = 0x0004b400,
.ce6_base_address = 0x0004b800,
.ce7_base_address = 0x0004bc00,
- /* qca4019 supports upto 12 copy engines. Since base address
+ /* qca4019 supports up to 12 copy engines. Since base address
* of ce8 to ce11 are not directly referred in the code,
* no need have them in separate members in this table.
* Copy Engine Address
@@ -924,7 +924,7 @@ static void ath10k_hw_map_target_mem(struct ath10k *ar, u32
msb)
ath10k_hif_write32(ar, address, msb);
}
-/* 1. Write to memory region of target, such as IRAM adn DRAM.
+/* 1. Write to memory region of target, such as IRAM and DRAM.
* 2. Target address( 0 ~ 00100000 & 0x00400000~0x00500000)
* can be written directly. See ath10k_pci_targ_cpu_to_ce_addr() too.
* 3. In order to access the region other than the above,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c
b/drivers/net/wireless/ath/ath10k/mac.c
index e086db920a82..ec8d5b29bc72 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4051,7 +4051,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
ath10k_tx_h_seq_no(vif, skb);
break;
case ATH10K_HW_TXRX_ETHERNET:
- /* Convert 802.11->802.3 header only if the frame was erlier
+ /* Convert 802.11->802.3 header only if the frame was earlier
* encapsulated to 802.11 by mac80211. Otherwise pass it as is.
*/
if (!(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP))
@@ -8097,7 +8097,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct
ieee80211_vif *vif,
/* TODO: Implement this function properly
* For now it is needed to reply to Probe Requests in IBSS mode.
- * Propably we need this information from FW.
+ * Probably we need this information from FW.
*/
static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
{
@@ -9686,7 +9686,7 @@ static const struct ieee80211_iface_limit
ath10k_tlv_if_limit_ibss[] = {
},
};
-/* FIXME: This is not thouroughly tested. These combinations may over- or
+/* FIXME: This is not thoroughly tested. These combinations may over- or
* underestimate hw/fw capabilities.
*/
static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = {
@@ -9926,7 +9926,7 @@ int ath10k_mac_register(struct ath10k *ar)
WLAN_CIPHER_SUITE_BIP_GMAC_128,
WLAN_CIPHER_SUITE_BIP_GMAC_256,
- /* Only QCA99x0 and QCA4019 varients support GCMP-128, GCMP-256
+ /* Only QCA99x0 and QCA4019 variants support GCMP-128, GCMP-256
* and CCMP-256 in hardware.
*/
WLAN_CIPHER_SUITE_GCMP,
diff --git a/drivers/net/wireless/ath/ath10k/pci.c
b/drivers/net/wireless/ath/ath10k/pci.c
index bf1c938be7d0..3691fcc0ab34 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1244,7 +1244,7 @@ static void ath10k_pci_process_htt_rx_cb(struct
ath10k_ce_pipe *ce_state,
unsigned int nbytes, max_nbytes, nentries;
int orig_len;
- /* No need to aquire ce_lock for CE5, since this is the only place CE5
+ /* No need to acquire ce_lock for CE5, since this is the only place CE5
* is processed other than init and deinit. Before releasing CE5
* buffers, interrupts are disabled. Thus CE5 access is serialized.
*/
diff --git a/drivers/net/wireless/ath/ath10k/pci.h
b/drivers/net/wireless/ath/ath10k/pci.h
index cf64898b9447..480cd97ab739 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -81,7 +81,7 @@ struct ath10k_pci_pipe {
/* Handle of underlying Copy Engine */
struct ath10k_ce_pipe *ce_hdl;
- /* Our pipe number; facilitiates use of pipe_info ptrs. */
+ /* Our pipe number; facilitates use of pipe_info ptrs. */
u8 pipe_num;
/* Convenience back pointer to hif_ce_state. */
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c
b/drivers/net/wireless/ath/ath10k/qmi.c
index d7e406916bc8..66cb7a1e628a 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -792,7 +792,7 @@ static void ath10k_qmi_event_server_arrive(struct
ath10k_qmi *qmi)
return;
/*
- * HACK: sleep for a while inbetween receiving the msa info response
+ * HACK: sleep for a while between receiving the msa info response
* and the XPU update to prevent SDM845 from crashing due to a security
* violation, when running MPSS.AT.4.0.c2-01184-SDM845_GEN_PACK-1.
*/
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h
b/drivers/net/wireless/ath/ath10k/rx_desc.h
index 6ce2a8b1060d..777e53aa69dc 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -448,7 +448,7 @@ struct rx_mpdu_end {
* - 4 bytes for WEP
* - 8 bytes for TKIP, AES
* [padding to 4 bytes]
- * c) A-MSDU subframe header (14 bytes) if appliable
+ * c) A-MSDU subframe header (14 bytes) if applicable
* d) LLC/SNAP (RFC1042, 8 bytes)
*
* In case of A-MSDU only first frame in sequence contains (a) and (b).
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c
b/drivers/net/wireless/ath/ath10k/sdio.c
index 24283c02a5ef..94291d442d7c 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1057,7 +1057,7 @@ static int ath10k_sdio_mbox_proc_pending_irqs(struct
ath10k *ar,
out:
/* An optimization to bypass reading the IRQ status registers
- * unecessarily which can re-wake the target, if upper layers
+ * unnecessarily which can re-wake the target, if upper layers
* determine that we are in a low-throughput mode, we can rely on
* taking another interrupt rather than re-checking the status
* registers which can re-wake the target.
diff --git a/drivers/net/wireless/ath/ath10k/thermal.c
b/drivers/net/wireless/ath/ath10k/thermal.c
index 36c9a1364253..cefd97323dfe 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -98,7 +98,7 @@ static ssize_t ath10k_thermal_show_temp(struct device *dev,
temperature = ar->thermal.temperature;
spin_unlock_bh(&ar->data_lock);
- /* display in millidegree celcius */
+ /* display in millidegree celsius */
ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
out:
mutex_unlock(&ar->conf_mutex);
diff --git a/drivers/net/wireless/ath/ath10k/thermal.h
b/drivers/net/wireless/ath/ath10k/thermal.h
index 5fdb020f4da3..1f4de9fbf2b3 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.h
+++ b/drivers/net/wireless/ath/ath10k/thermal.h
@@ -19,7 +19,7 @@ struct ath10k_thermal {
/* protected by conf_mutex */
u32 throttle_state;
u32 quiet_period;
- /* temperature value in Celcius degree
+ /* temperature value in Celsius degree
* protected by data_lock
*/
int temperature;
diff --git a/drivers/net/wireless/ath/ath10k/usb.h
b/drivers/net/wireless/ath/ath10k/usb.h
index 34d683e8fc18..48e066ba8162 100644
--- a/drivers/net/wireless/ath/ath10k/usb.h
+++ b/drivers/net/wireless/ath/ath10k/usb.h
@@ -26,7 +26,7 @@
#define ATH10K_USB_EP_ADDR_APP_DATA_MP_OUT 0x03
#define ATH10K_USB_EP_ADDR_APP_DATA_HP_OUT 0x04
-/* diagnostic command defnitions */
+/* diagnostic command definitions */
#define ATH10K_USB_CONTROL_REQ_SEND_BMI_CMD 1
#define ATH10K_USB_CONTROL_REQ_RECV_BMI_RESP 2
#define ATH10K_USB_CONTROL_REQ_DIAG_CMD 3
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index b39c9b78b32b..dbb48d70f2e9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1813,7 +1813,7 @@ struct wmi_tlv_pdev_get_temp_cmd {
struct wmi_tlv_pdev_temperature_event {
__le32 tlv_hdr;
- /* temperature value in Celcius degree */
+ /* temperature value in Celsius degree */
__le32 temperature;
__le32 pdev_id;
} __packed;
@@ -2548,7 +2548,7 @@ struct nlo_channel_prediction_cfg {
/* Preconfigured stationary threshold.
* Lesser value means more conservative. Bigger value means more
aggressive.
- * Maximum is 100 and mininum is 0.
+ * Maximum is 100 and minimum is 0.
*/
__le32 stationary_threshold;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c
b/drivers/net/wireless/ath/ath10k/wmi.c
index 074d8ba5072a..980d4124fa28 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3555,7 +3555,7 @@ static void ath10k_wmi_update_tim(struct ath10k *ar,
__le32 t;
u32 v, tim_len;
- /* When FW reports 0 in tim_len, ensure atleast first byte
+ /* When FW reports 0 in tim_len, ensure at least first byte
* in tim_bitmap is considered for pvm calculation.
*/
tim_len = tim_info->tim_len ? __le32_to_cpu(tim_info->tim_len) : 1;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h
b/drivers/net/wireless/ath/ath10k/wmi.h
index 4abd12e78028..6de3cc4640a0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3170,7 +3170,7 @@ struct wmi_start_scan_common {
/* dwell time in msec on passive channels */
__le32 dwell_time_passive;
/*
- * min time in msec on the BSS channel,only valid if atleast one
+ * min time in msec on the BSS channel,only valid if at least one
* VDEV is active
*/
__le32 min_rest_time;
@@ -3196,7 +3196,7 @@ struct wmi_start_scan_common {
* and bssid_list
*/
__le32 repeat_probe_time;
- /* time in msec between 2 consequetive probe requests with in a set. */
+ /* time in msec between 2 consecutive probe requests with in a set. */
__le32 probe_spacing_time;
/*
* data inactivity time in msec on bss channel that will be used by
@@ -4397,7 +4397,7 @@ struct wmi_pdev_stats_tx {
/* wal pdev continuous xretry */
__le32 pdev_cont_xretry;
- /* wal pdev continous xretry */
+ /* wal pdev continuous xretry */
__le32 pdev_tx_timeout;
/* wal pdev resets */
@@ -5240,7 +5240,7 @@ enum wmi_vdev_param {
* scheduler.
*/
WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
- /* enable/dsiable WDS for this VDEV */
+ /* enable/disable WDS for this VDEV */
WMI_VDEV_PARAM_WDS,
/* ATIM Window */
WMI_VDEV_PARAM_ATIM_WINDOW,
@@ -5372,7 +5372,7 @@ enum wmi_10x_vdev_param {
* scheduler.
*/
WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
- /* enable/dsiable WDS for this VDEV */
+ /* enable/disable WDS for this VDEV */
WMI_10X_VDEV_PARAM_WDS,
/* ATIM Window */
WMI_10X_VDEV_PARAM_ATIM_WINDOW,
@@ -5904,7 +5904,7 @@ enum wmi_sta_ps_param_tx_wake_threshold {
enum wmi_sta_ps_param_pspoll_count {
WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
/*
- * Values greater than 0 indicate the maximum numer of PS-Poll frames
+ * Values greater than 0 indicate the maximum number of PS-Poll frames
* FW will send before waking up.
*/
@@ -6947,7 +6947,7 @@ struct wmi_echo_ev_arg {
};
struct wmi_pdev_temperature_event {
- /* temperature value in Celcius degree */
+ /* temperature value in Celsius degree */
__le32 temperature;
} __packed;
--
2.37.0
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
