On 3/17/23 12:38, Kalle Valo wrote:
Giammarco Marzano <giammarco.marz...@gmail.com> writes:this file is for add definition for ZTE MF289F. The device is currently under review as PR on OpenWRT: https://github.com/openwrt/openwrt/pull/10418 Please ignore my email of 3 August, this board binary add support for 5Ghz on AT2 version with correct calibration data. * description for what hardware this is: - it is a IPQ4019 based board - one QCA4019 radio is used as 2.4GHz radio - one QCA4019 radio is used as 5Ghz radio in AT2 revision - one QCA9984 radio is used as 5GHz radio in AT1 revision * origin of the board file: taken from stock firmware image * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f md5sum: 175139f44d2ae01c2b23e093d571e962 + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f md5sum: 175139f44d2ae01c2b23e093d571e962 * attach the actual board file (board.bin) - The name of the file is equal to the first id string in the board-2.bin (minus the ".bin")Note: There was only board file attached but the text listed two.
I can tell you what happen. This is thanks to the following OpenWrt Pull Request: <https://github.com/openwrt/openwrt/pull/13019> But back to Giammarco Marzano mail: His bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin contained a packed "board-2.bin". So, the board-2.bin ended up within the linux-firmware's board-2.bin: <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/ath10k/QCA4019/hw1.0/board-2.bin> See at offset 14c360. There's an QCA-ATH10K-BOARD string. I don't think ath10k supports board-2.bin within board-2.bin. I've added the extracted the two board files within and attached them including the note to this mail after the === separator. (also fixed the md5sums) === * description for what hardware this is: - it is a IPQ4019 based board - one QCA4019 radio is used as 2.4GHz radio - one QCA4019 radio is used as 5Ghz radio in AT2 revision - one QCA9984 radio is used as 5GHz radio in AT1 revision * origin of the board file: taken from stock firmware image * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f md5sum: f0243c9d7b45bb0ffe3e58c27e71fe80 + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f md5sum: e0fd5376d24f0c2c3c49ba2a7fc37376 * attach the actual board file (board.bin) - The name of the file is equal to the first id string in the board-2.bin (minus the ".bin") Regards, Christian
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=zte,mf289f.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=zte,mf289f.bin
Description: Binary data
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
