On 2/28/2024 10:46 AM, James Prestwood wrote: > This does appear to have fixed it! For reference this was my test: > > for i in $(seq 1 100000); do sudo ip link set wlan0 down; sudo ip link > set wlan0 up; echo $?; done > > I never saw the up command fail, and after a while I noticed one of the > iterations took a bit longer to complete. Checked dmesg and saw: > > [ 1006.017198] ath10k_pci 0000:02:00.0: failed to receive service ready > completion, polling.. > [ 1006.017295] ath10k_pci 0000:02:00.0: service ready completion > received, continuing normally > > I then started IWD and it was able to connect fine (data frames were > being passed). I was able to trigger this 3 times relatively quickly, > each time IWD connected afterwards. So from my end this appears fixed. > > You can add tested-by me if you like: > > Tested-By: James Prestwood <prest...@gmail.com> # on QCA6174 hw3.2
Thanks for the initial report and the testing :) /jeff
