In supported_vht_mcs_rate_nss1, the rate for MCS9 & VHT20 is defined as
{780, 867}, this does not align with firmware's definition and therefore
fails the verification in ath10k_mac_get_rate_flags_vht():
invalid vht params rate 960 100kbps nss 1 mcs 9
Change it to {865, 960} to align with firmware, so this issue could be
fixed.
Since ath10k_hw_params::supports_peer_stats_info is enabled only for
QCA6174, this change does not affect other chips.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: 3344b99d69ab ("ath10k: add bitrate parse for peer stats info")
Reported-by: Paul Menzel <pmen...@molgen.mpg.de>
Closes:
https://lore.kernel.org/lkml/fba24cd3-4a1e-4072-8585-840227278...@molgen.mpg.de/
Signed-off-by: Baochen Qiang <quic_bqi...@quicinc.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c
b/drivers/net/wireless/ath/ath10k/mac.c
index a5da32e87106..3c34f3d8e555 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -9121,7 +9121,7 @@ static const struct ath10k_index_vht_data_rate_type
supported_vht_mcs_rate_nss1[
{6, {2633, 2925}, {1215, 1350}, {585, 650} },
{7, {2925, 3250}, {1350, 1500}, {650, 722} },
{8, {3510, 3900}, {1620, 1800}, {780, 867} },
- {9, {3900, 4333}, {1800, 2000}, {780, 867} }
+ {9, {3900, 4333}, {1800, 2000}, {865, 960} }
};
/*MCS parameters with Nss = 2 */
--
2.25.1
