2008/1/21, John W. Linville <[EMAIL PROTECTED]>:
> ...instead of using AR5K_KEYCACHE_SIZE, which would seem to be a
> typo/thinko...
>
> Signed-off-by: John W. Linville <[EMAIL PROTECTED]>
> ---
> drivers/net/wireless/ath5k/base.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/base.c
> b/drivers/net/wireless/ath5k/base.c
> index 742616a..75e5970 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -663,7 +663,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw
> *hw)
> * Reset the key cache since some parts do not
> * reset the contents on initial power up.
> */
> - for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
> + for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
> ath5k_hw_reset_key(ah, i);
>
> /*
> --
> 1.5.3.3
>
This seems ok since we check entry against KEYTABLE_SIZE (it was
indeed a typo)...
int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
{
unsigned int i;
ATH5K_TRACE(ah->ah_sc);
AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
...
So it's O.K. by me ;-)
But now that you 've mentioned it, i have found the following...
reset_key seems ok for 5211 since the whole cache is zeroed, that's
what we also get on regdumps during atach...
W: 0x8800 = 0x00000000 - AR5K_KEYTABLE_0_5211(0)
................................ (ath_hal_keyreset)
W: 0x8804 = 0x00000000 - AR5K_KEYTABLE_0_5211(1)
................................ (ath_hal_keyreset)
W: 0x8808 = 0x00000000 - AR5K_KEYTABLE_0_5211(2)
................................ (ath_hal_keyreset)
...
W: 0x97f4 = 0x00000000 - AR5K_KEYTABLE_0_5211(1021)
................................ (ath_hal_keyreset)
W: 0x97f8 = 0x00000000 - AR5K_KEYTABLE_0_5211(1022)
................................ (ath_hal_keyreset)
W: 0x97fc = 0x00000000 - AR5K_KEYTABLE_0_5211(1023)
................................ (ath_hal_keyreset)
(We have 128 * 8 = 1024 entries as expected)
BUT on newer chips, during reset the cache is not entirely zero, check
this out...
This is repeating for every key cache entry (every 8 steps on the table)...
a) We read the register entry + 5 (in our code just before the for
loop -we need nested loops for this)...
R: 0x8814 = 0x00003058 - AR5K_KEYTABLE_0_5211(5)
..................11.....1.11... (ath_hal_keyreset)
b) Inside the for loop we just replace it with 0x00000007 (no matter
what we read)...
W: 0x8814 = 0x00000007 - AR5K_KEYTABLE_0_5211(5)
.............................111 (unknown)
This is how it looks...
1st entry...
R: 0x8814 = 0x00003058 - AR5K_KEYTABLE_0_5211(5)
..................11.....1.11... (ath_hal_keyreset)
W: 0x8800 = 0x00000000 - AR5K_KEYTABLE_0_5211(0)
................................ (ath_hal_keyreset)
W: 0x8804 = 0x00000000 - AR5K_KEYTABLE_0_5211(1)
................................ (ath_hal_keyreset)
W: 0x8808 = 0x00000000 - AR5K_KEYTABLE_0_5211(2)
................................ (ath_hal_keyreset)
W: 0x880c = 0x00000000 - AR5K_KEYTABLE_0_5211(3)
................................ (ath_hal_keyreset)
W: 0x8810 = 0x00000000 - AR5K_KEYTABLE_0_5211(4)
................................ (ath_hal_keyreset)
W: 0x8814 = 0x00000007 - AR5K_KEYTABLE_0_5211(5)
.............................111 (ath_hal_keyreset)
W: 0x8818 = 0x00000000 - AR5K_KEYTABLE_0_5211(6)
................................ (ath_hal_keyreset)
W: 0x881c = 0x00000000 - AR5K_KEYTABLE_0_5211(7)
................................ (ath_hal_keyreset)
2nd entry...
R: 0x8834 = 0x0000be95 - AR5K_KEYTABLE_0_5211(13)
................1.11111.1..1.1.1 (ath_hal_keyreset)
W: 0x8820 = 0x00000000 - AR5K_KEYTABLE_0_5211(8)
................................ (ath_hal_keyreset)
W: 0x8824 = 0x00000000 - AR5K_KEYTABLE_0_5211(9)
................................ (ath_hal_keyreset)
W: 0x8828 = 0x00000000 - AR5K_KEYTABLE_0_5211(10)
................................ (ath_hal_keyreset)
W: 0x882c = 0x00000000 - AR5K_KEYTABLE_0_5211(11)
................................ (ath_hal_keyreset)
W: 0x8830 = 0x00000000 - AR5K_KEYTABLE_0_5211(12)
................................ (ath_hal_keyreset)
W: 0x8834 = 0x00000007 - AR5K_KEYTABLE_0_5211(13)
.............................111 (ath_hal_keyreset)
W: 0x8838 = 0x00000000 - AR5K_KEYTABLE_0_5211(14)
................................ (ath_hal_keyreset)
W: 0x883c = 0x00000000 - AR5K_KEYTABLE_0_5211(15)
................................ (ath_hal_keyreset)
etc.
Same happens on 5418 also (just there registers always read
0x00000007, at least in my case).
So for chips newer than 5211 we have to tweak reset_key a little. I
have a patch ready but i'll post them all together on my next series
that 'll addd 2413 support + rf code cleanups/refactoring (currently
we 're having exams and i don't have any time to propertly make a
patch series the way i want to).
Anyway this patch is correct so thanx again ;-)
Acked-by: Nick Kossifidis <[EMAIL PROTECTED]>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
