On 02/07/2008 10:25 PM, Tino Keitel wrote: > On Wed, Feb 06, 2008 at 10:46:39 -0500, Bob Copeland wrote: >>>> We failed to resume after a hardware reset here for a whole second. Is >>>> there any >>>> version of ath5k which worked for you (is this a regression)? >>> I cannot speak for Tino, but my ath5k never worked in MacBook -- it >>> failed the same way, and I believe the hardware was the same. My >>> understanding was that it was a known bug with PCIE devices, but I got >>> that out of reading list archives. >> Nick Kossifidis and I are in the process of debugging this -- we >> determined that AR5K_RESET_CTL_PCI hangs the card in hw_nic_wakeup. >> It doesn't look like there is any general support for 5424 cards yet.
Seems hold for this case too, as Bob noted. > I tried the patch, and the card was detected. I was able to associate > with an WPA2 AP and send/receive some traffic. But after a while the > interface broke: > > ath0: No ProbeResp from current AP 00:14:bf:16:25:87 - assume out of > range > ath5k_hw_get_isr: 0x00000020 > ... > ath0: failed to set channel 165 (5825 MHz) for scan > ath0: failed to restore operational channel after scan > printk: 19 messages suppressed. > ath5k phy0: calibration timeout (2447MHz) > printk: 1 messages suppressed. > ath5k phy0: calibration timeout (2447MHz) > ath5k phy0: unable to reset hardware: -11 What's the srev a phy ver printed few lines above this, please? _______________________________________________ ath5k-devel mailing list [email protected] https://lists.ath5k.org/mailman/listinfo/ath5k-devel
