On Thursday 03 April 2008 04:27:31 Luis R. Rodriguez wrote:
> >  so in the "unspecified" case we really don't know much about the units,
> > in the worst case we can't even assume that 1/2 the value will mean 1/2
> > of the received signal strength. it's very hard to work with this values,
> > but it's better than nothing.
> >
> >  other cards might not have noise, so no absolute (dBm) measurement, but
> > a form of RSSI which is measured in dB (that is a logarithmic
> > difference). in this case we might not know which reference point the
> > measurement is taken to, but we know how it behaves: -3 dB means half of
> > the signal strength. if you add a 6dB gain antenna you can expect to see
> > the signal reading to increase by 6dB. it's not strictly SNR (because we
> > don't know the noise) but quite close to it.
> >
> >  i think it's important to know the difference between this 3 cases i
> > order to make some sense of the values in userspace gui, roaming agents,
> > mesh link metrics, etc...
>
> Agreed, but can you give me an example of a card which does provide
> RSSI in db for values we don't know and that UNSPEC cannot handle? Is
> this what is assumed of the rt2x00 cards?

i currently assume that for rt2x00 and zd1211 cards - but i'm really just 
guessing here. feedback from driver authors or people who have more knowledge 
about the hardware would be greatly appreciated!

here's the current table:

    DRIVER          SIGNAL    MAX       NOISE   QUAL
    -----------------------------------------------------------------
    adm8211         unspec(?) 100   n/a     missing
    at76_usb        unspec(?) (?)   unused  missing
    ath5k           dBm             dBm     percent rssi
    b43legacy       dBm             dBm     percent jssi(?)
    b43             dBm             dBm     percent jssi(?)
    iwl-3945        dBm             dBm     percent snr+more
    iwl-4965        dBm             dBm     percent snr+more
    p54             unspec    127   n/a     missing
    rt2x00                              percent rssi+tx/rx frame success
      rt2400        dB(?)     100   n/a
      rt2500pci     dB(?)     100   n/a
      rt2500usb     dB(?)     100   n/a
      rt61pci       dB(?)     100   n/a
      rt73usb       dB(?)     100   n/a
    rtl8180         unspec(?) 65    n/a     (?)
    rtl8187         unspec(?) 65    (?)     noise(?)
    zd1211          dB(?)     100   n/a     percent

bruno
_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel

Reply via email to