any feedback on these 2 patches?
bruno
On Monday 07 April 2008 06:25:42 Bruno Randolf wrote:
> trying to clean up the signal/noise mess. the previous code in mac80211 did
> not have much definition of what units of signal and noise were provided
> and used implicit mechanisms from the wireless extensions.
>
> introduce hardware capability flags to let the hardware specify if it can
> provide signal and noise level values and which units it can provide:
>
> IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific
> IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point
> IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW
>
> IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW
>
> also clean up the confusing names which were used for signal, noise and
> qual before.
>
> if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver
> has to provide the maximum value (max_signal) it reports in order for
> applications to make sense of the signal values.
>
> i tried my best to find out for each driver what it can provide and update
> it but i'm not sure (?) for some of them and used the more conservative
> guess in doubt. could driver authors please check and fix that up later or
> tell me the correct units?
>
> DRIVER SIGNAL MAX NOISE QUAL
> -----------------------------------------------------------------
> adm8211 unspec(?) 100 n/a missing
> at76_usb unspec(?) (?) unused missing
> ath5k dBm dBm percent rssi
> b43legacy dBm dBm percent jssi(?)
> b43 dBm dBm percent jssi(?)
> iwl-3945 dBm dBm percent snr+more
> iwl-4965 dBm dBm percent snr+more
> p54 unspec 127 n/a missing
> rt2x00 dBm n/a percent rssi+tx/rx frame success
> rt2400 dBm n/a
> rt2500pci dBm n/a
> rt2500usb dBm n/a
> rt61pci dBm n/a
> rt73usb dBm n/a
> rtl8180 unspec(?) 65 n/a (?)
> rtl8187 unspec(?) 65 (?) noise(?)
> zd1211 dB(?) 100 n/a percent
>
> drivers/net/wireless/ath5k/base.c: Changes-licensed-under:
> 3-Clause-BSD
>
> Signed-off-by: Bruno Randolf <[EMAIL PROTECTED]>
> ---
>
> drivers/net/wireless/adm8211.c | 7 ++--
> drivers/net/wireless/at76_usb.c | 5 ++-
> drivers/net/wireless/ath5k/base.c | 23 +++----------
> drivers/net/wireless/b43/main.c | 8 ++---
> drivers/net/wireless/b43/xmit.c | 5 +--
> drivers/net/wireless/b43legacy/main.c | 7 ++--
> drivers/net/wireless/b43legacy/xmit.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-3945.c | 18 +++++-----
> drivers/net/wireless/iwlwifi/iwl-4965.c | 12 +++----
> drivers/net/wireless/iwlwifi/iwl-core.c | 16 ++-------
> drivers/net/wireless/iwlwifi/iwl3945-base.c | 15 ++-------
> drivers/net/wireless/p54common.c | 7 ++--
> drivers/net/wireless/rt2x00/rt2400pci.c | 5 +--
> drivers/net/wireless/rt2x00/rt2500pci.c | 6 ++-
> drivers/net/wireless/rt2x00/rt2500usb.c | 6 ++-
> drivers/net/wireless/rt2x00/rt2x00dev.c | 4 +-
> drivers/net/wireless/rt2x00/rt61pci.c | 5 +--
> drivers/net/wireless/rt2x00/rt73usb.c | 5 +--
> drivers/net/wireless/rtl8180_dev.c | 9 +++--
> drivers/net/wireless/rtl8187_dev.c | 10 +++---
> drivers/net/wireless/zd1211rw/zd_mac.c | 12 +++----
> include/net/mac80211.h | 47
> ++++++++++++++++++++------- net/ieee80211/ieee80211_rx.c |
> 2 +
> net/mac80211/debugfs_sta.c | 2 +
> net/mac80211/ieee80211.c | 10 +++---
> net/mac80211/ieee80211_i.h | 2 +
> net/mac80211/ieee80211_ioctl.c | 28 +++++++++++-----
> net/mac80211/ieee80211_sta.c | 12 +++----
> net/mac80211/rx.c | 4 +-
> net/mac80211/sta_info.h | 2 +
> 30 files changed, 151 insertions(+), 147 deletions(-)
>
>
> diff --git a/drivers/net/wireless/adm8211.c
> b/drivers/net/wireless/adm8211.c index 2e257ee..f5518f8 100644
> --- a/drivers/net/wireless/adm8211.c
> +++ b/drivers/net/wireless/adm8211.c
> @@ -446,9 +446,9 @@ static void adm8211_interrupt_rci(struct ieee80211_hw
> *dev) struct ieee80211_rx_status rx_status = {0};
>
> if (priv->pdev->revision < ADM8211_REV_CA)
> - rx_status.ssi = rssi;
> + rx_status.signal = rssi;
> else
> - rx_status.ssi = 100 - rssi;
> + rx_status.signal = 100 - rssi;
>
> rx_status.rate_idx = rate;
>
> @@ -1901,9 +1901,10 @@ static int __devinit adm8211_probe(struct pci_dev
> *pdev,
>
> dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
> /* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
> + dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
>
> dev->channel_change_time = 1000;
> - dev->max_rssi = 100; /* FIXME: find better value */
> + dev->max_signal = 100; /* FIXME: find better value */
>
> dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
>
> diff --git a/drivers/net/wireless/at76_usb.c
> b/drivers/net/wireless/at76_usb.c index 33fa026..009f8a7 100644
> --- a/drivers/net/wireless/at76_usb.c
> +++ b/drivers/net/wireless/at76_usb.c
> @@ -1599,7 +1599,7 @@ static void at76_rx_tasklet(unsigned long param)
> at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
> priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);
>
> - rx_status.ssi = buf->rssi;
> + rx_status.signal = buf->rssi;
> rx_status.flag |= RX_FLAG_DECRYPTED;
> rx_status.flag |= RX_FLAG_IV_STRIPPED;
>
> @@ -2273,7 +2273,8 @@ static int at76_init_new_device(struct at76_priv
> *priv,
>
> /* mac80211 initialisation */
> priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band;
> - priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
> + priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_UNSPEC;
>
> SET_IEEE80211_DEV(priv->hw, &interface->dev);
> SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
> diff --git a/drivers/net/wireless/ath5k/base.c
> b/drivers/net/wireless/ath5k/base.c index 8862d24..339fbe1 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -461,13 +461,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
>
> /* Initialize driver private data */
> SET_IEEE80211_DEV(hw, &pdev->dev);
> - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
> + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_DBM |
> + IEEE80211_HW_NOISE_DBM;
> hw->extra_tx_headroom = 2;
> hw->channel_change_time = 5000;
> - /* these names are misleading */
> - hw->max_rssi = -110; /* signal in dBm */
> - hw->max_noise = -110; /* noise in dBm */
> - hw->max_signal = 100; /* we will provide a percentage based on rssi */
> sc = hw->priv;
> sc->hw = hw;
> sc->pdev = pdev;
> @@ -1896,20 +1894,9 @@ accept:
> rxs.freq = sc->curchan->center_freq;
> rxs.band = sc->curband->band;
>
> - /*
> - * signal quality:
> - * the names here are misleading and the usage of these
> - * values by iwconfig makes it even worse
> - */
> - /* noise floor in dBm, from the last noise calibration */
> rxs.noise = sc->ah->ah_noise_floor;
> - /* signal level in dBm */
> - rxs.ssi = rxs.noise + rs.rs_rssi;
> - /*
> - * "signal" is actually displayed as Link Quality by iwconfig
> - * we provide a percentage based on rssi (assuming max rssi 64)
> - */
> - rxs.signal = rs.rs_rssi * 100 / 64;
> + rxs.signal = rxs.noise + rs.rs_rssi;
> + rxs.qual = rs.rs_rssi * 100 / 64;
>
> rxs.antenna = rs.rs_antenna;
> rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);
> diff --git a/drivers/net/wireless/b43/main.c
> b/drivers/net/wireless/b43/main.c index a4e6a59..e86cd57 100644
> --- a/drivers/net/wireless/b43/main.c
> +++ b/drivers/net/wireless/b43/main.c
> @@ -4301,10 +4301,10 @@ static int b43_wireless_init(struct ssb_device
> *dev)
>
> /* fill hw info */
> hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> - IEEE80211_HW_RX_INCLUDES_FCS;
> - hw->max_signal = 100;
> - hw->max_rssi = -110;
> - hw->max_noise = -110;
> + IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_DBM |
> + IEEE80211_HW_NOISE_DBM;
> +
> hw->queues = b43_modparam_qos ? 4 : 1;
> SET_IEEE80211_DEV(hw, dev->dev);
> if (is_valid_ether_addr(sprom->et1mac))
> diff --git a/drivers/net/wireless/b43/xmit.c
> b/drivers/net/wireless/b43/xmit.c index ec10a8e..1c8f8e1 100644
> --- a/drivers/net/wireless/b43/xmit.c
> +++ b/drivers/net/wireless/b43/xmit.c
> @@ -574,13 +574,12 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff
> *skb, const void *_rxhdr) }
> }
>
> - status.ssi = b43_rssi_postprocess(dev, jssi,
> + status.signal = b43_rssi_postprocess(dev, jssi,
> (phystat0 & B43_RX_PHYST0_OFDM),
> (phystat0 & B43_RX_PHYST0_GAINCTL),
> (phystat3 & B43_RX_PHYST3_TRSTATE));
> status.noise = dev->stats.link_noise;
> - /* the next line looks wrong, but is what mac80211 wants */
> - status.signal = (jssi * 100) / B43_RX_MAX_SSI;
> + status.qual = (jssi * 100) / B43_RX_MAX_SSI;
> if (phystat0 & B43_RX_PHYST0_OFDM)
> status.rate_idx = b43_plcp_get_bitrate_idx_ofdm(plcp,
> phytype == B43_PHYTYPE_A);
> diff --git a/drivers/net/wireless/b43legacy/main.c
> b/drivers/net/wireless/b43legacy/main.c index f518e79..5f95ef2 100644
> --- a/drivers/net/wireless/b43legacy/main.c
> +++ b/drivers/net/wireless/b43legacy/main.c
> @@ -3689,10 +3689,9 @@ static int b43legacy_wireless_init(struct ssb_device
> *dev)
>
> /* fill hw info */
> hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> - IEEE80211_HW_RX_INCLUDES_FCS;
> - hw->max_signal = 100;
> - hw->max_rssi = -110;
> - hw->max_noise = -110;
> + IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_DBM |
> + IEEE80211_HW_NOISE_DBM;
> hw->queues = 1; /* FIXME: hardware has more queues */
> SET_IEEE80211_DEV(hw, dev->dev);
> if (is_valid_ether_addr(sprom->et1mac))
> diff --git a/drivers/net/wireless/b43legacy/xmit.c
> b/drivers/net/wireless/b43legacy/xmit.c index dcad249..906a087 100644
> --- a/drivers/net/wireless/b43legacy/xmit.c
> +++ b/drivers/net/wireless/b43legacy/xmit.c
> @@ -532,12 +532,12 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
> }
> }
>
> - status.ssi = b43legacy_rssi_postprocess(dev, jssi,
> + status.signal = b43legacy_rssi_postprocess(dev, jssi,
> (phystat0 & B43legacy_RX_PHYST0_OFDM),
> (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
> (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
> status.noise = dev->stats.link_noise;
> - status.signal = (jssi * 100) / B43legacy_RX_MAX_SSI;
> + status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
> /* change to support A PHY */
> if (phystat0 & B43legacy_RX_PHYST0_OFDM)
> status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp,
> false);
> diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c
> b/drivers/net/wireless/iwlwifi/iwl-3945.c index eb30819..f1fa81d 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-3945.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
> @@ -520,7 +520,7 @@ static void iwl3945_add_radiotap(struct iwl3945_priv
> *priv, {
> /* First cache any information we need before we overwrite
> * the information provided in the skb from the hardware */
> - s8 signal = stats->ssi;
> + s8 signal = stats->signal;
> s8 noise = 0;
> int rate = stats->rate_idx;
> u64 tsf = stats->mactime;
> @@ -697,7 +697,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv
> *priv, }
>
> /* Convert 3945's rssi indicator to dBm */
> - rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
> + rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
>
> /* Set default noise value to -127 */
> if (priv->last_rx_noise == 0)
> @@ -716,21 +716,21 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv
> *priv, * Calculate rx_status.signal (quality indicator in %) based on SNR.
> */ if (rx_stats_noise_diff) {
> snr = rx_stats_sig_avg / rx_stats_noise_diff;
> - rx_status.noise = rx_status.ssi -
> + rx_status.noise = rx_status.signal -
> iwl3945_calc_db_from_ratio(snr);
> - rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi,
> + rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
> rx_status.noise);
>
> /* If noise info not available, calculate signal quality indicator (%)
> * using just the dBm signal level. */
> } else {
> rx_status.noise = priv->last_rx_noise;
> - rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi, 0);
> + rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
> }
>
>
> IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
> - rx_status.ssi, rx_status.noise, rx_status.signal,
> + rx_status.signal, rx_status.noise, rx_status.qual,
> rx_stats_sig_avg, rx_stats_noise_diff);
>
> header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
> @@ -740,8 +740,8 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv
> *priv, IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u,
> Rate:%u\n", network_packet ? '*' : ' ',
> le16_to_cpu(rx_hdr->channel),
> - rx_status.ssi, rx_status.ssi,
> - rx_status.ssi, rx_status.rate_idx);
> + rx_status.signal, rx_status.signal,
> + rx_status.noise, rx_status.rate_idx);
>
> #ifdef CONFIG_IWL3945_DEBUG
> if (iwl3945_debug_level & (IWL_DL_RX))
> @@ -752,7 +752,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv
> *priv, if (network_packet) {
> priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
> priv->last_tsf = le64_to_cpu(rx_end->timestamp);
> - priv->last_rx_rssi = rx_status.ssi;
> + priv->last_rx_rssi = rx_status.signal;
> priv->last_rx_noise = rx_status.noise;
> }
>
> diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c
> b/drivers/net/wireless/iwlwifi/iwl-4965.c index 89d600c..d35385e 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-4965.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
> @@ -3292,7 +3292,7 @@ static void iwl4965_add_radiotap(struct iwl_priv
> *priv, struct ieee80211_rx_status *stats,
> u32 ampdu_status)
> {
> - s8 signal = stats->ssi;
> + s8 signal = stats->signal;
> s8 noise = 0;
> int rate = stats->rate_idx;
> u64 tsf = stats->mactime;
> @@ -3945,7 +3945,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv
> *priv, priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
>
> /* Find max signal strength (dBm) among 3 antenna/receiver chains */
> - rx_status.ssi = iwl4965_calc_rssi(rx_start);
> + rx_status.signal = iwl4965_calc_rssi(rx_start);
>
> /* Meaningful noise values are available only from beacon statistics,
> * which are gathered only when associated, and indicate noise
> @@ -3954,11 +3954,11 @@ static void iwl4965_rx_reply_rx(struct iwl_priv
> *priv, if (iwl4965_is_associated(priv) &&
> !test_bit(STATUS_SCANNING, &priv->status)) {
> rx_status.noise = priv->last_rx_noise;
> - rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi,
> + rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal,
> rx_status.noise);
> } else {
> rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
> - rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, 0);
> + rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0);
> }
>
> /* Reset beacon noise level if not associated. */
> @@ -3970,12 +3970,12 @@ static void iwl4965_rx_reply_rx(struct iwl_priv
> *priv, iwl4965_dbg_report_frame(priv, pkt, header, 1);
>
> IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
> - rx_status.ssi, rx_status.noise, rx_status.signal,
> + rx_status.signal, rx_status.noise, rx_status.qual,
> (unsigned long long)rx_status.mactime);
>
> network_packet = iwl4965_is_network_packet(priv, header);
> if (network_packet) {
> - priv->last_rx_rssi = rx_status.ssi;
> + priv->last_rx_rssi = rx_status.signal;
> priv->last_beacon_time = priv->ucode_beacon_time;
> priv->last_tsf = le64_to_cpu(rx_start->timestamp);
> }
> diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c
> b/drivers/net/wireless/iwlwifi/iwl-core.c index 49fb52f..277219f 100644
> --- a/drivers/net/wireless/iwlwifi/iwl-core.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-core.c
> @@ -221,18 +221,10 @@ static void iwlcore_init_hw(struct iwl_priv *priv)
> struct ieee80211_hw *hw = priv->hw;
> hw->rate_control_algorithm = "iwl-4965-rs";
>
> - /* Tell mac80211 and its clients (e.g. Wireless Extensions)
> - * the range of signal quality values that we'll provide.
> - * Negative values for level/noise indicate that we'll provide dBm.
> - * For WE, at least, non-0 values here *enable* display of values
> - * in app (iwconfig). */
> - hw->max_rssi = -20; /* signal level, negative indicates dBm */
> - hw->max_noise = -20; /* noise level, negative indicates dBm */
> - hw->max_signal = 100; /* link quality indication (%) */
> -
> - /* Tell mac80211 our Tx characteristics */
> - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
> -
> + /* Tell mac80211 our characteristics */
> + hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> + IEEE80211_HW_SIGNAL_DBM |
> + IEEE80211_HW_NOISE_DBM;
> /* Default value; 4 EDCA QOS priorities */
> hw->queues = 4;
> #ifdef CONFIG_IWL4965_HT
> diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c
> b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 51480a4..13a1b35 100644
> --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
> +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
> @@ -8007,17 +8007,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev,
> const struct pci_device_id *e
>
> priv->ibss_beacon = NULL;
>
> - /* Tell mac80211 and its clients (e.g. Wireless Extensions)
> - * the range of signal quality values that we'll provide.
> - * Negative values for level/noise indicate that we'll provide dBm.
> - * For WE, at least, non-0 values here *enable* display of values
> - * in app (iwconfig). */
> - hw->max_rssi = -20; /* signal level, negative indicates dBm */
> - hw->max_noise = -20; /* noise level, negative indicates dBm */
> - hw->max_signal = 100; /* link quality indication (%) */
> -
> - /* Tell mac80211 our Tx characteristics */
> - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
> + /* Tell mac80211 our characteristics */
> + hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> + IEEE80211_HW_SIGNAL_DBM |
> + IEEE80211_HW_NOISE_DBM;
>
> /* 4 EDCA QOS priorities */
> hw->queues = 4;
> diff --git a/drivers/net/wireless/p54common.c
> b/drivers/net/wireless/p54common.c index 63f9bad..2c131da 100644
> --- a/drivers/net/wireless/p54common.c
> +++ b/drivers/net/wireless/p54common.c
> @@ -355,7 +355,7 @@ static void p54_rx_data(struct ieee80211_hw *dev,
> struct sk_buff *skb) struct ieee80211_rx_status rx_status = {0};
> u16 freq = le16_to_cpu(hdr->freq);
>
> - rx_status.ssi = hdr->rssi;
> + rx_status.signal = hdr->rssi;
> /* XX correct? */
> rx_status.rate_idx = hdr->rate & 0xf;
> rx_status.freq = freq;
> @@ -1004,9 +1004,10 @@ struct ieee80211_hw *p54_init_common(size_t
> priv_data_len) skb_queue_head_init(&priv->tx_queue);
> dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
> dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
> - IEEE80211_HW_RX_INCLUDES_FCS;
> + IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_UNSPEC;
> dev->channel_change_time = 1000; /* TODO: find actual value */
> - dev->max_rssi = 127;
> + dev->max_signal = 127;
>
> priv->tx_stats.data[0].limit = 5;
> dev->queues = 1;
> diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c
> b/drivers/net/wireless/rt2x00/rt2400pci.c index b41187a..e659caa 100644
> --- a/drivers/net/wireless/rt2x00/rt2400pci.c
> +++ b/drivers/net/wireless/rt2x00/rt2400pci.c
> @@ -1364,10 +1364,9 @@ static void rt2400pci_probe_hw_mode(struct
> rt2x00_dev *rt2x00dev) /*
> * Initialize all hw fields.
> */
> - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
> + rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> + IEEE80211_HW_SIGNAL_DBM;
> rt2x00dev->hw->extra_tx_headroom = 0;
> - rt2x00dev->hw->max_signal = MAX_SIGNAL;
> - rt2x00dev->hw->max_rssi = MAX_RX_SSI;
> rt2x00dev->hw->queues = 2;
>
> SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
> diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c
> b/drivers/net/wireless/rt2x00/rt2500pci.c index 5ade097..8ab8476 100644
> --- a/drivers/net/wireless/rt2x00/rt2500pci.c
> +++ b/drivers/net/wireless/rt2x00/rt2500pci.c
> @@ -1684,10 +1684,10 @@ static void rt2500pci_probe_hw_mode(struct
> rt2x00_dev *rt2x00dev) /*
> * Initialize all hw fields.
> */
> - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
> + rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> + IEEE80211_HW_SIGNAL_DBM;
> +
> rt2x00dev->hw->extra_tx_headroom = 0;
> - rt2x00dev->hw->max_signal = MAX_SIGNAL;
> - rt2x00dev->hw->max_rssi = MAX_RX_SSI;
> rt2x00dev->hw->queues = 2;
>
> SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
> diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c
> b/drivers/net/wireless/rt2x00/rt2500usb.c index 6bb07b3..a2264ea 100644
> --- a/drivers/net/wireless/rt2x00/rt2500usb.c
> +++ b/drivers/net/wireless/rt2x00/rt2500usb.c
> @@ -1587,10 +1587,10 @@ static void rt2500usb_probe_hw_mode(struct
> rt2x00_dev *rt2x00dev) rt2x00dev->hw->flags =
> IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> IEEE80211_HW_RX_INCLUDES_FCS |
> - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
> + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> + IEEE80211_HW_SIGNAL_DBM;
> +
> rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
> - rt2x00dev->hw->max_signal = MAX_SIGNAL;
> - rt2x00dev->hw->max_rssi = MAX_RX_SSI;
> rt2x00dev->hw->queues = 2;
>
> SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
> diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c
> b/drivers/net/wireless/rt2x00/rt2x00dev.c index 50ea7bd..8bd7071 100644
> --- a/drivers/net/wireless/rt2x00/rt2x00dev.c
> +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
> @@ -613,9 +613,9 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
> rt2x00dev->link.qual.rx_success++;
>
> rx_status->rate_idx = idx;
> - rx_status->signal =
> + rx_status->qual =
> rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
> - rx_status->ssi = rxdesc->rssi;
> + rx_status->signal = rxdesc->rssi;
> rx_status->flag = rxdesc->flags;
> rx_status->antenna = rt2x00dev->link.ant.active.rx;
>
> diff --git a/drivers/net/wireless/rt2x00/rt61pci.c
> b/drivers/net/wireless/rt2x00/rt61pci.c index 1cb056b..e20d32f 100644
> --- a/drivers/net/wireless/rt2x00/rt61pci.c
> +++ b/drivers/net/wireless/rt2x00/rt61pci.c
> @@ -2249,10 +2249,9 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev
> *rt2x00dev) */
> rt2x00dev->hw->flags =
> IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
> + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> + IEEE80211_HW_SIGNAL_DBM;
> rt2x00dev->hw->extra_tx_headroom = 0;
> - rt2x00dev->hw->max_signal = MAX_SIGNAL;
> - rt2x00dev->hw->max_rssi = MAX_RX_SSI;
> rt2x00dev->hw->queues = 4;
>
> SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
> diff --git a/drivers/net/wireless/rt2x00/rt73usb.c
> b/drivers/net/wireless/rt2x00/rt73usb.c index a9efe25..98693cd 100644
> --- a/drivers/net/wireless/rt2x00/rt73usb.c
> +++ b/drivers/net/wireless/rt2x00/rt73usb.c
> @@ -1831,10 +1831,9 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev
> *rt2x00dev) */
> rt2x00dev->hw->flags =
> IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
> + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> + IEEE80211_HW_SIGNAL_DBM;
> rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
> - rt2x00dev->hw->max_signal = MAX_SIGNAL;
> - rt2x00dev->hw->max_rssi = MAX_RX_SSI;
> rt2x00dev->hw->queues = 4;
>
> SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
> diff --git a/drivers/net/wireless/rtl8180_dev.c
> b/drivers/net/wireless/rtl8180_dev.c index c181f23..c220998 100644
> --- a/drivers/net/wireless/rtl8180_dev.c
> +++ b/drivers/net/wireless/rtl8180_dev.c
> @@ -132,8 +132,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
>
> rx_status.antenna = (flags2 >> 15) & 1;
> /* TODO: improve signal/rssi reporting */
> - rx_status.signal = flags2 & 0xFF;
> - rx_status.ssi = (flags2 >> 8) & 0x7F;
> + rx_status.qual = flags2 & 0xFF;
> + rx_status.signal = (flags2 >> 8) & 0x7F;
> /* XXX: is this correct? */
> rx_status.rate_idx = (flags >> 20) & 0xF;
> rx_status.freq = dev->conf.channel->center_freq;
> @@ -894,9 +894,10 @@ static int __devinit rtl8180_probe(struct pci_dev
> *pdev, dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
>
> dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> - IEEE80211_HW_RX_INCLUDES_FCS;
> + IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_UNSPEC;
> dev->queues = 1;
> - dev->max_rssi = 65;
> + dev->max_signal = 65;
>
> reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
> reg &= RTL818X_TX_CONF_HWVER_MASK;
> diff --git a/drivers/net/wireless/rtl8187_dev.c
> b/drivers/net/wireless/rtl8187_dev.c index c03834d..9bd5c08 100644
> --- a/drivers/net/wireless/rtl8187_dev.c
> +++ b/drivers/net/wireless/rtl8187_dev.c
> @@ -261,8 +261,8 @@ static void rtl8187_rx_cb(struct urb *urb)
> }
>
> rx_status.antenna = (hdr->signal >> 7) & 1;
> - rx_status.signal = 64 - min(hdr->noise, (u8)64);
> - rx_status.ssi = signal;
> + rx_status.qual = 64 - min(hdr->noise, (u8)64);
> + rx_status.signal = signal;
> rx_status.rate_idx = rate;
> rx_status.freq = dev->conf.channel->center_freq;
> rx_status.band = dev->conf.channel->band;
> @@ -737,11 +737,11 @@ static int __devinit rtl8187_probe(struct
> usb_interface *intf,
>
> priv->mode = IEEE80211_IF_TYPE_MNTR;
> dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
> - IEEE80211_HW_RX_INCLUDES_FCS;
> + IEEE80211_HW_RX_INCLUDES_FCS |
> + IEEE80211_HW_SIGNAL_UNSPEC;
> dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
> dev->queues = 1;
> - dev->max_rssi = 65;
> - dev->max_signal = 64;
> + dev->max_signal = 65;
>
> eeprom.data = dev;
> eeprom.register_read = rtl8187_eeprom_register_read;
> diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c
> b/drivers/net/wireless/zd1211rw/zd_mac.c index 69c45ca..6286eb2 100644
> --- a/drivers/net/wireless/zd1211rw/zd_mac.c
> +++ b/drivers/net/wireless/zd1211rw/zd_mac.c
> @@ -638,7 +638,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct
> ieee80211_hdr *rx_hdr,
>
> memset(&status, 0, sizeof(status));
> status.flags = IEEE80211_TX_STATUS_ACK;
> - status.ack_signal = stats->ssi;
> + status.ack_signal = stats->signal;
> __skb_unlink(skb, q);
> tx_status(hw, skb, &status, 1);
> goto out;
> @@ -691,8 +691,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8
> *buffer, unsigned int length)
>
> stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) -
> 1].center_freq; stats.band = IEEE80211_BAND_2GHZ;
> - stats.ssi = status->signal_strength;
> - stats.signal = zd_rx_qual_percent(buffer,
> + stats.signal = status->signal_strength;
> + stats.qual = zd_rx_qual_percent(buffer,
> length - sizeof(struct rx_status),
> status);
>
> @@ -982,10 +982,10 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct
> usb_interface *intf) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
>
> hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
> - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
> - hw->max_rssi = 100;
> - hw->max_signal = 100;
> + IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
> + IEEE80211_HW_SIGNAL_DB;
>
> + hw->max_signal = 100;
> hw->queues = 1;
> hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
>
> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
> index 48428a6..e913a7e 100644
> --- a/include/net/mac80211.h
> +++ b/include/net/mac80211.h
> @@ -329,13 +329,16 @@ enum mac80211_rx_flags {
> * The low-level driver should provide this information (the subset
> * supported by hardware) to the 802.11 code with each received
> * frame.
> + *
> * @mactime: value in microseconds of the 64-bit Time Synchronization
> Function * (TSF) timer when the first data symbol (MPDU) arrived at the
> hardware. * @band: the active band when this frame was received
> * @freq: frequency the radio was tuned to when receiving this frame, in
> MHz - * @ssi: signal strength when receiving this frame
> - * @signal: used as 'qual' in statistics reporting
> - * @noise: PHY noise when receiving this frame
> + * @signal: signal strength when receiving this frame, either in dBm, in
> dB or + * unspecified depending on the hardware capabilities flags
> + * @IEEE80211_HW_SIGNAL_*
> + * @noise: noise when receiving this frame, in dBm.
> + * @qual: overall signal quality indication, in percent (0-100).
> * @antenna: antenna used
> * @rate_idx: index of data rate into band's supported rates
> * @flag: %RX_FLAG_*
> @@ -344,9 +347,9 @@ struct ieee80211_rx_status {
> u64 mactime;
> enum ieee80211_band band;
> int freq;
> - int ssi;
> int signal;
> int noise;
> + int qual;
> int antenna;
> int rate_idx;
> int flag;
> @@ -385,7 +388,8 @@ enum ieee80211_tx_status_flags {
> * relevant only if IEEE80211_TX_STATUS_AMPDU was set.
> * @ampdu_ack_map: block ack bit map for the aggregation.
> * relevant only if IEEE80211_TX_STATUS_AMPDU was set.
> - * @ack_signal: signal strength of the ACK frame
> + * @ack_signal: signal strength of the ACK frame either in dBm, dB or
> unspec + * depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_* *
> @queue_length: ?? REMOVE
> * @queue_number: ?? REMOVE
> */
> @@ -697,6 +701,25 @@ enum ieee80211_tkip_key_type {
> * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
> * Hardware is not capable of receiving frames with short preamble on
> * the 2.4 GHz band.
> + *
> + * @IEEE80211_HW_SIGNAL_UNSPEC:
> + * Hardware can provide signal values but we don't know its units. We
> + * expect values between 0 and @max_signal.
> + * If possible please provide dB or dBm instead.
> + *
> + * @IEEE80211_HW_SIGNAL_DB:
> + * Hardware gives signal values in dB, decibel difference from an
> + * arbitrary, fixed reference. We expect values between 0 and @max_signal.
> + * If possible please provide dBm instead.
> + *
> + * @IEEE80211_HW_SIGNAL_DBM:
> + * Hardware gives signal values in dBm, decibel difference from
> + * one milliwatt. This is the preferred method since it is standardized
> + * between different devices. @max_signal does not need to be set.
> + *
> + * @IEEE80211_HW_NOISE_DBM:
> + * Hardware can provide noise (radio interference) values in units dBm,
> + * decibel difference from one milliwatt.
> */
> enum ieee80211_hw_flags {
> IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0,
> @@ -704,6 +727,10 @@ enum ieee80211_hw_flags {
> IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
> IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
> IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
> + IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
> + IEEE80211_HW_SIGNAL_DB = 1<<6,
> + IEEE80211_HW_SIGNAL_DBM = 1<<7,
> + IEEE80211_HW_NOISE_DBM = 1<<8,
> };
>
> /**
> @@ -734,12 +761,8 @@ enum ieee80211_hw_flags {
> *
> * @channel_change_time: time (in microseconds) it takes to change
> channels. *
> - * @max_rssi: Maximum value for ssi in RX information, use
> - * negative numbers for dBm and 0 to indicate no support.
> - *
> - * @max_signal: like @max_rssi, but for the signal value.
> - *
> - * @max_noise: like @max_rssi, but for the noise value.
> + * @max_signal: Maximum value for signal (rssi) in RX information, used
> + * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
> *
> * @queues: number of available hardware transmit queues for
> * data packets. WMM/QoS requires at least four.
> @@ -762,9 +785,7 @@ struct ieee80211_hw {
> int channel_change_time;
> int vif_data_size;
> u8 queues;
> - s8 max_rssi;
> s8 max_signal;
> - s8 max_noise;
> };
>
> /**
> diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
> index 1e3f87c..c5d7e4c 100644
> --- a/net/ieee80211/ieee80211_rx.c
> +++ b/net/ieee80211/ieee80211_rx.c
> @@ -385,7 +385,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct
> sk_buff *skb,
>
> wstats.updated = 0;
> if (rx_stats->mask & IEEE80211_STATMASK_RSSI) {
> - wstats.level = rx_stats->rssi;
> + wstats.level = rx_stats->signal;
> wstats.updated |= IW_QUAL_LEVEL_UPDATED;
> } else
> wstats.updated |= IW_QUAL_LEVEL_INVALID;
> diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
> index 256ea88..e3443f3 100644
> --- a/net/mac80211/debugfs_sta.c
> +++ b/net/mac80211/debugfs_sta.c
> @@ -63,8 +63,8 @@ STA_FILE(tx_fragments, tx_fragments, LU);
> STA_FILE(tx_filtered, tx_filtered_count, LU);
> STA_FILE(tx_retry_failed, tx_retry_failed, LU);
> STA_FILE(tx_retry_count, tx_retry_count, LU);
> -STA_FILE(last_rssi, last_rssi, D);
> STA_FILE(last_signal, last_signal, D);
> +STA_FILE(last_qual, last_qual, D);
> STA_FILE(last_noise, last_noise, D);
> STA_FILE(channel_use, channel_use, D);
> STA_FILE(wep_weak_iv_count, wep_weak_iv_count, LU);
> diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
> index aaa5480..a45777d 100644
> --- a/net/mac80211/ieee80211.c
> +++ b/net/mac80211/ieee80211.c
> @@ -1675,13 +1675,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
>
> local->hw.conf.beacon_int = 1000;
>
> - local->wstats_flags |= local->hw.max_rssi ?
> - IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID;
> - local->wstats_flags |= local->hw.max_signal ?
> + local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
> + IEEE80211_HW_SIGNAL_DB |
> + IEEE80211_HW_SIGNAL_DBM) ?
> IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
> - local->wstats_flags |= local->hw.max_noise ?
> + local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
> IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
> - if (local->hw.max_rssi < 0 || local->hw.max_noise < 0)
> + if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
> local->wstats_flags |= IW_QUAL_DBM;
>
> result = sta_info_start(local);
> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
> index 6c62dd4..e3bbb5e 100644
> --- a/net/mac80211/ieee80211_i.h
> +++ b/net/mac80211/ieee80211_i.h
> @@ -90,7 +90,7 @@ struct ieee80211_sta_bss {
> u16 capability; /* host byte order */
> enum ieee80211_band band;
> int freq;
> - int rssi, signal, noise;
> + int signal, noise, qual;
> u8 *wpa_ie;
> size_t wpa_ie_len;
> u8 *rsn_ie;
> diff --git a/net/mac80211/ieee80211_ioctl.c
> b/net/mac80211/ieee80211_ioctl.c index b047eeb..96d04d9 100644
> --- a/net/mac80211/ieee80211_ioctl.c
> +++ b/net/mac80211/ieee80211_ioctl.c
> @@ -155,14 +155,26 @@ static int ieee80211_ioctl_giwrange(struct net_device
> *dev, range->num_encoding_sizes = 2;
> range->max_encoding_tokens = NUM_DEFAULT_KEYS;
>
> - range->max_qual.qual = local->hw.max_signal;
> - range->max_qual.level = local->hw.max_rssi;
> - range->max_qual.noise = local->hw.max_noise;
> + if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC ||
> + local->hw.flags & IEEE80211_HW_SIGNAL_DB)
> + range->max_qual.level = local->hw.max_signal;
> + else if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
> + range->max_qual.level = -110;
> + else
> + range->max_qual.level = 0;
> +
> + if (local->hw.flags & IEEE80211_HW_NOISE_DBM)
> + range->max_qual.noise = -110;
> + else
> + range->max_qual.noise = 0;
> +
> + range->max_qual.qual = 100;
> range->max_qual.updated = local->wstats_flags;
>
> - range->avg_qual.qual = local->hw.max_signal/2;
> - range->avg_qual.level = 0;
> - range->avg_qual.noise = 0;
> + range->avg_qual.qual = 50;
> + /* not always true but better than nothing */
> + range->avg_qual.level = range->max_qual.level / 2;
> + range->avg_qual.noise = range->max_qual.noise / 2;
> range->avg_qual.updated = local->wstats_flags;
>
> range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
> @@ -971,8 +983,8 @@ static struct iw_statistics
> *ieee80211_get_wireless_stats(struct net_device *dev wstats->qual.noise =
> 0;
> wstats->qual.updated = IW_QUAL_ALL_INVALID;
> } else {
> - wstats->qual.level = sta->last_rssi;
> - wstats->qual.qual = sta->last_signal;
> + wstats->qual.level = sta->last_signal;
> + wstats->qual.qual = sta->last_qual;
> wstats->qual.noise = sta->last_noise;
> wstats->qual.updated = local->wstats_flags;
> }
> diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
> index c20ef89..6bfe938 100644
> --- a/net/mac80211/ieee80211_sta.c
> +++ b/net/mac80211/ieee80211_sta.c
> @@ -1930,8 +1930,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct
> ieee80211_sub_if_data *sdata, local->hw.conf.channel->center_freq,
> ifsta->ssid, ifsta->ssid_len);
> if (bss) {
> - sta->last_rssi = bss->rssi;
> sta->last_signal = bss->signal;
> + sta->last_qual = bss->qual;
> sta->last_noise = bss->noise;
> ieee80211_rx_bss_put(dev, bss);
> }
> @@ -2662,9 +2662,9 @@ static void ieee80211_rx_bss_info(struct net_device
> *dev,
>
> bss->timestamp = beacon_timestamp;
> bss->last_update = jiffies;
> - bss->rssi = rx_status->ssi;
> bss->signal = rx_status->signal;
> bss->noise = rx_status->noise;
> + bss->qual = rx_status->qual;
> if (!beacon)
> bss->probe_resp++;
>
> @@ -3369,9 +3369,9 @@ static int ieee80211_sta_config_auth(struct
> net_device *dev, !ieee80211_sta_match_ssid(ifsta, bss->ssid,
> bss->ssid_len)) continue;
>
> - if (!selected || top_rssi < bss->rssi) {
> + if (!selected || top_rssi < bss->signal) {
> selected = bss;
> - top_rssi = bss->rssi;
> + top_rssi = bss->signal;
> }
> }
> if (selected)
> @@ -4000,8 +4000,8 @@ ieee80211_sta_scan_result(struct net_device *dev,
>
> memset(&iwe, 0, sizeof(iwe));
> iwe.cmd = IWEVQUAL;
> - iwe.u.qual.qual = bss->signal;
> - iwe.u.qual.level = bss->rssi;
> + iwe.u.qual.qual = bss->qual;
> + iwe.u.qual.level = bss->signal;
> iwe.u.qual.noise = bss->noise;
> iwe.u.qual.updated = local->wstats_flags;
> current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
> diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
> index 0ac6db5..58dead4 100644
> --- a/net/mac80211/rx.c
> +++ b/net/mac80211/rx.c
> @@ -209,7 +209,7 @@ ieee80211_rx_monitor(struct ieee80211_local *local,
> struct sk_buff *origskb, cpu_to_le16(IEEE80211_CHAN_DYN |
> IEEE80211_CHAN_2GHZ);
>
> - rtfixed->antsignal = status->ssi;
> + rtfixed->antsignal = status->signal;
> rthdr->it_len = cpu_to_le16(rtap_len);
> }
>
> @@ -725,8 +725,8 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data
> *rx)
>
> sta->rx_fragments++;
> sta->rx_bytes += rx->skb->len;
> - sta->last_rssi = rx->status->ssi;
> sta->last_signal = rx->status->signal;
> + sta->last_qual = rx->status->qual;
> sta->last_noise = rx->status->noise;
>
> if (!(rx->fc & IEEE80211_FCTL_MOREFRAGS)) {
> diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
> index ebb7b2b..758e947 100644
> --- a/net/mac80211/sta_info.h
> +++ b/net/mac80211/sta_info.h
> @@ -217,8 +217,8 @@ struct sta_info {
> * from this STA */
> unsigned long rx_fragments; /* number of received MPDUs */
> unsigned long rx_dropped; /* number of dropped MPDUs from this STA */
> - int last_rssi; /* RSSI of last received frame from this STA */
> int last_signal; /* signal of last received frame from this STA */
> + int last_qual; /* qual of last received frame from this STA */
> int last_noise; /* noise of last received frame from this STA */
> /* last received seq/frag number from this STA (per RX queue) */
> __le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless"
> in the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel
