Hello,

I had some problem with the last compat-wirless 2008-04-01 and ath5k module.

My pci card is correctly detected, i can scan, connect to the web (using 
wpa) but sometimes dmesg return this message and my network freeze:

wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: invalid Michael MIC in data frame from 00:07:cb:9e:24:c6
wlan0: RX disassociation from 8e:3b:02:39:1d:dc (reason=14)
wlan0: disassociated
wlan0: deauthenticate(reason=14)
wlan0: RX deauthentication from 8e:3b:02:39:1d:dc (reason=6)
wlan0: deauthenticated
wlan0: RX deauthentication from 8e:3b:02:39:1d:dc (reason=6)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: deauthenticate(reason=14)
wlan0: authenticate with AP 8e:3b:02:39:1d:dc
wlan0: authenticate with AP 8e:3b:02:39:1d:dc
wlan0: authenticate with AP 8e:3b:02:39:1d:dc
wlan0: authentication with AP 8e:3b:02:39:1d:dc timed out
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 8e:3b:02:39:1d:dc
wlan0: RX authentication from 8e:3b:02:39:1d:dc (alg=0 transaction=2 
status=0)
wlan0: authenticated
wlan0: associate with AP 8e:3b:02:39:1d:dc
wlan0: RX ReassocResp from 8e:3b:02:39:1d:dc (capab=0x411 status=0 aid=3)
wlan0: associated



output of lspci:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 
Multiprotocol MAC/baseband processor (rev 01)
    Subsystem: Netgear Unknown device 5e00
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath5k_pci
    Kernel modules: ath5k


When the driver is loaded:

ath5k_pci 0000:02:00.0: registered as 'phy0'
ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)

i'm not a dev, but if it's interresting someone

_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel

Reply via email to