On Tue, Mar 03, 2009 at 06:31:05AM +0200, Nick Kossifidis wrote:
> and i don't believe i've ever seen them, so we can warn on them too
> and print something like "Reserved rate code: %x", also it would be
> nice to warn on XR rates (1,2,3,6,7) in case we want to debug this in
> the future.

Nick, are you ok with taking this patch as-is and adding the other stuff
in later?  It does fix a warning in mac80211 for unknown rates and 
instead warns with the actual hw rate code we get.

Here's a repost (rebased, if it matters):

From: Bob Copeland <[email protected]>
Date: Mon, 2 Mar 2009 21:55:18 -0500
Subject: [PATCH] ath5k: warn and correct rate for unknown hw rate indexes

ath5k sets up a mapping table from the hardware rate index to
the rate index used by mac80211; however, we have seen some
received frames with incorrect rate indexes.  Such frames
normally get dropped with a warning in __ieee80211_rx(),
but it doesn't include enough information to track down the
error.

This patch adds a warning to hw_to_driver_rix for any lookups
that result in a rate index of -1, then returns a valid rate so
the frame can be processed.

Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bob Copeland <[email protected]>
---
 drivers/net/wireless/ath5k/base.c |   15 ++++++++++++---
 drivers/net/wireless/ath5k/base.h |    2 +-
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c 
b/drivers/net/wireless/ath5k/base.c
index f28b86c..6580df2 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1088,9 +1088,18 @@ ath5k_mode_setup(struct ath5k_softc *sc)
 static inline int
 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
 {
-       WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
-                       "hw_rix out of bounds: %x\n", hw_rix);
-       return sc->rate_idx[sc->curband->band][hw_rix];
+       int rix;
+
+       /* return base rate on errors */
+       if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
+                       "hw_rix out of bounds: %x\n", hw_rix))
+               return 0;
+
+       rix = sc->rate_idx[sc->curband->band][hw_rix];
+       if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
+               rix = 0;
+
+       return rix;
 }
 
 /***************\
diff --git a/drivers/net/wireless/ath5k/base.h 
b/drivers/net/wireless/ath5k/base.h
index 20e0d14..8229561 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -112,7 +112,7 @@ struct ath5k_softc {
        struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
        struct ieee80211_channel channels[ATH_CHAN_MAX];
        struct ieee80211_rate   rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
-       u8                      rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
+       s8                      rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES];
        enum nl80211_iftype     opmode;
        struct ath5k_hw         *ah;            /* Atheros HW */
 
-- 
1.6.0.6


-- 
Bob Copeland %% www.bobcopeland.com

_______________________________________________
ath5k-devel mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-devel

Reply via email to