And while we're about it, what's support like for the old broadcom pci
ADM8211 card:
0000:00:0b.0 Network controller: Linksys ADMtek ADM8211 802.11b
Wireless Interface (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 2602
Flags: medium devsel, IRQ 19
I/O ports at 9400 [size=256]
Memory at ed101000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 30100000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
This produces zilch on my 64 bit athlon running kern 2.6.22.10 in 64
bit mode with the latest wireles-compat stack:
[590632.616943] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) ->
IRQ 19
[590632.640345] 0000:00:0b.0 (adm8211): Channel range: 1 - 13
[590632.640463] 0000:00:0b.0 (adm8211): RFtype=1 BBPtype=1 Specific BBP=0
Transceiver=0
[590632.640535] WARNING: at
/usr/local/src/compat-wireless-2.6/net/wireless/core.c:267 wiphy_register()
[590632.665337]
[590632.665338] Call Trace:
[590632.676634] [<ffffffff880ed566>] :cfg80211:wiphy_register+0x126/0x150
[590632.694525] [<ffffffff881d9040>]
:adm8211:adm8211_eeprom_register_write+0x0/0x60
[590632.715011] [<ffffffff881a44f9>]
:mac80211:ieee80211_register_hw+0x29/0x3c0
[590632.734315] [<ffffffff881dcdf9>] :adm8211:adm8211_probe+0x339/0x500
[590632.751704] [<ffffffff802d1f30>] sysfs_make_dirent+0x30/0x50
[590632.769234] [<ffffffff803245c0>] pci_call_probe+0x10/0x20
[590632.784307] [<ffffffff8032462d>] __pci_device_probe+0x5d/0x70
[590632.800321] [<ffffffff80324670>] pci_device_probe+0x30/0x60
[590632.815867] [<ffffffff8037f074>] really_probe+0x94/0x130
[590632.830710] [<ffffffff8037f17b>] driver_probe_device+0x4b/0x70
[590632.846955] [<ffffffff8037f30b>] __driver_attach+0xbb/0xf0
[590632.862266] [<ffffffff8037f250>] __driver_attach+0x0/0xf0
[590632.877319] [<ffffffff8037f250>] __driver_attach+0x0/0xf0
[590632.892400] [<ffffffff8037e0ba>] bus_for_each_dev+0x5a/0x80
[590632.907946] [<ffffffff8037e88c>] bus_add_driver+0x7c/0x120
[590632.923256] [<ffffffff80324a3d>] __pci_register_driver+0x5d/0xa0
[590632.939971] [<ffffffff8024ed26>] sys_init_module+0xf6/0x170
[590632.955491] [<ffffffff8020a0be>] system_call+0x7e/0x83
[590632.970435]
[590632.974797] 0000:00:0b.0 (adm8211): Cannot register device
[590632.990001] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
[590633.006636] adm8211: probe of 0000:00:0b.0 failed with error -22
[590633.028461] usbcore: registered new interface driver zd1211rw
[590633.050754] usbcore: registered new interface driver rtl8187
The warning is
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
Which appears to come from
wiphy->bands[band] == NULL
for band = 0 to IEEE80211_NUM_BANDS - 1
Any clues?
Peter
_______________________________________________
ath5k-users mailing list
[email protected]
https://lists.ath5k.org/mailman/listinfo/ath5k-users
