Hallo,
I tried to configure a wlan card with ath5k on linux, but it is not possible to change the mode from "managed" to "ad-hoc". >iwconfig wlan1 mode ad-hoc Error for wireless request "Set Mode" (8B06) : SET failed on device wlan1 ; Device or resource busy. the running kernel is 2.6.24-1-amd64. Here are some further details: 16:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) Subsystem: Atheros Communications Inc. Device 1042 Flags: medium devsel, IRQ 16 Memory at 80000000 (32-bit, non-prefetchable) [size=64K] Capabilities: [44] Power Management version 2 Kernel modules: ath5k -==Device Information==- MAC Version: 5212 (0x50) MAC Revision: 5213A (0x59) PHY Revision: 5112a (0x36) -==EEPROM Information==- EEPROM Version: 4.8 EEPROM Size: 16K Regulatory Domain: 0x0 -==== Capabilities ====- | 802.11a Support: yes | | 802.11b Support: yes | | 802.11g Support: yes | | RFKill Support: no | | 32KHz Crystal: yes | ======================== GPIO registers: CR 00000000 DO 00000000 DI 00000000 _______________________________________________ ath5k-users mailing list [email protected] https://lists.ath5k.org/mailman/listinfo/ath5k-users
