-------- Original-Nachricht -------- > Datum: Sun, 25 Jan 2009 22:42:56 +0530 > Von: Sujith <m.suj...@gmail.com> > An: "Alexander Bartha" <alexander.bartha.office.r...@gmx.at> > CC: ath9k-devel@lists.ath9k.org > Betreff: [ath9k-devel] ath9k WMP300nv2 (AR5416)
> Alexander Bartha wrote: > > Hello to ath9k developers > > > > i am using: > > > > Distribution: gentoo > > Kernel: 2.6.28-r1 > > Linux-Headers: 2.6.28-r1 > > Wireless Card: Linksys WMP300n v2 European > > Router: Linksys WRT160n > > The easiest way is to just use compat-wireless. > See: http://wireless.kernel.org/en/users/Download > > Sujith > -- > http://sujith-m.blogspot.com After building my kernel with cfg80211 and mac80211 as modules it was posible to install the compat-wirless drivers. And for the first time the worked! ifconfig tells me that my bandwith is only 1MBS and the ip i get from my LinksysWRT160 is renewed every 6Minutes. Later in the evening i make package updates (crda 0.9.5 to 1.0.1) my linksysWMP300nv2 card wont worke. The last message i get was link is not ready. /var/log/messages before update: an 27 15:01:53 ws1 [ 152.020563] cfg80211: Using static regulatory domain info Jan 27 15:01:53 ws1 [ 152.020568] cfg80211: Regulatory domain: US Jan 27 15:01:53 ws1 [ 152.020570] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 27 15:01:53 ws1 [ 152.020575] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jan 27 15:01:53 ws1 [ 152.020578] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 27 15:01:53 ws1 [ 152.020581] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 27 15:01:53 ws1 [ 152.020585] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 27 15:01:53 ws1 [ 152.020588] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 27 15:01:53 ws1 [ 152.020592] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jan 27 15:01:53 ws1 [ 152.020595] cfg80211: Calling CRDA for country: US Jan 27 15:01:53 ws1 [ 152.040083] ath9k: 0.1 Jan 27 15:01:53 ws1 [ 152.040164] ath9k 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jan 27 15:01:53 ws1 [ 152.102946] cfg80211: Regulatory domain changed to country: US Jan 27 15:01:53 ws1 [ 152.102951] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 27 15:01:53 ws1 [ 152.102956] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Jan 27 15:01:53 ws1 [ 152.102959] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Jan 27 15:01:53 ws1 [ 152.102963] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 27 15:01:53 ws1 [ 152.102966] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 27 15:01:53 ws1 [ 152.102969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Jan 27 15:01:54 ws1 [ 152.465925] phy0: Selected rate control algorithm 'ath9k_rate_control' Jan 27 15:01:54 ws1 [ 152.467143] cfg80211: Calling CRDA for country: AT Jan 27 15:01:54 ws1 [ 152.467188] Registered led device: ath9k-phy0:radio Jan 27 15:01:54 ws1 [ 152.467213] Registered led device: ath9k-phy0:assoc Jan 27 15:01:54 ws1 [ 152.467241] Registered led device: ath9k-phy0:tx Jan 27 15:01:54 ws1 [ 152.467266] Registered led device: ath9k-phy0:rx Jan 27 15:01:54 ws1 [ 152.467282] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf9be0000, irq=20 Jan 27 15:01:54 ws1 [ 152.475534] cfg80211: Regulatory domain changed to country: AT Jan 27 15:01:54 ws1 [ 152.475539] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 27 15:01:54 ws1 [ 152.475543] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) Jan 27 15:01:54 ws1 [ 152.475547] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) Jan 27 15:01:54 ws1 [ 152.475550] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) Jan 27 15:01:54 ws1 [ 152.475553] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) Jan 27 15:01:55 ws1 [ 153.371753] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jan 27 15:01:56 ws1 [ 154.337141] wlan0: authenticate with AP f5da96a8 Jan 27 15:01:56 ws1 [ 154.339093] wlan0: authenticated Jan 27 15:01:56 ws1 [ 154.339097] wlan0: associate with AP f5da96a8 Jan 27 15:01:56 ws1 [ 154.344295] wlan0: RX AssocResp from f28f202a (capab=0x411 status=0 aid=1) Jan 27 15:01:56 ws1 [ 154.344300] wlan0: associated Jan 27 15:01:56 ws1 [ 154.352968] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Jan 27 15:01:56 ws1 wpa_cli: interface wlan0 CONNECTED Jan 27 15:01:57 ws1 dhcpcd[8802]: wlan0: dhcpcd 4.0.7 starting Jan 27 15:01:57 ws1 dhcpcd[8802]: wlan0: broadcasting for a lease Jan 27 15:01:58 ws1 dhcpcd[8802]: wlan0: offered 192.168.1.100 from 192.168.1.1 Jan 27 15:01:58 ws1 dhcpcd[8802]: wlan0: checking 192.168.1.100 is available on attached networks Jan 27 15:02:04 ws1 dhcpcd[8802]: wlan0: acknowledged 192.168.1.100 from 192.168.1.1 Jan 27 15:02:04 ws1 dhcpcd[8802]: wlan0: leased 192.168.1.100 for 86400 seconds Jan 27 15:02:06 ws1 [ 164.757007] wlan0: no IPv6 routers present /var/log/messages after crda update: ws1 [ 475.022872] ath9k 0000:04:00.0: PCI INT A disabled Jan 28 13:11:59 ws1 [ 475.022906] ath9k: Driver unloaded Jan 28 13:12:34 ws1 rc-scripts: WARNING: net.wlan0 has not yet been started. Jan 28 13:12:45 ws1 [ 520.974197] cfg80211: Using static regulatory domain info Jan 28 13:12:45 ws1 [ 520.974202] cfg80211: Regulatory domain: US Jan 28 13:12:45 ws1 [ 520.974205] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 28 13:12:45 ws1 [ 520.974209] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) Jan 28 13:12:45 ws1 [ 520.974213] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 28 13:12:45 ws1 [ 520.974216] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 28 13:12:45 ws1 [ 520.974219] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 28 13:12:45 ws1 [ 520.974223] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) Jan 28 13:12:45 ws1 [ 520.974226] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) Jan 28 13:12:45 ws1 [ 520.974230] cfg80211: Calling CRDA for country: US Jan 28 13:12:45 ws1 [ 520.992789] ath9k: 0.1 Jan 28 13:12:45 ws1 [ 520.992829] ath9k 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jan 28 13:12:46 ws1 [ 521.420252] phy0: Selected rate control algorithm 'ath9k_rate_control' Jan 28 13:12:46 ws1 [ 521.421635] cfg80211: Calling CRDA for country: AT Jan 28 13:12:46 ws1 [ 521.421683] Registered led device: ath9k-phy0:radio Jan 28 13:12:46 ws1 [ 521.421708] Registered led device: ath9k-phy0:assoc Jan 28 13:12:46 ws1 [ 521.421732] Registered led device: ath9k-phy0:tx Jan 28 13:12:46 ws1 [ 521.421756] Registered led device: ath9k-phy0:rx Jan 28 13:12:46 ws1 [ 521.421773] phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81: mem=0xf9520000, irq=20 Jan 28 13:12:47 ws1 [ 522.336623] ADDRCONF(NETDEV_UP): wlan0: link is not ready Is the only way to use the old crda??? Please help kind regards Alexander Bartha -- NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
