Thank you. I have do it successful. I can associate with the ap. but the speed
is still low.
ap:
iwconfig:
wlan0 IEEE 802.11abgn Mode:Master Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
hostapd.conf
interface=wlan0
driver=nl80211
ssid=mytest
hw_mode=g
channel=6
ieee80211n=1
ht_capab=[HT40-][SHORT-GT-40][DSSS_CCK-40]
macaddr_acl=0
#auth_algs=1
#ignore_broadcast_ssid=0
#wpa=2
#wpa_passphrase=lihongjian
#wpa_key_mgmt=WPA-PSK
#wpa_pairwise=TKIP
#rsn_pairwise=CCMP
station:channel 6,11g
wlan0 IEEE 802.11abgn ESSID:"mytest"
Mode:Managed Frequency:2.437 GHz Access Point: 00:80:48:68:06:A7
Bit Rate=11 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-34 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
r...@openwrt:/# iperf -c 192.168.11.1 -i 5 -t 600
------------------------------------------------------------
Client connecting to 192.168.11.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.121 port 47226 connected with 192.168.11.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 3.43 MBytes 5.75 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 5.0-10.0 sec 3.52 MBytes 5.91 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-15.0 sec 3.07 MBytes 5.15 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 15.0-20.0 sec 3.47 MBytes 5.82 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 20.0-25.0 sec 3.45 MBytes 5.78 Mbits/sec
And if I run ap and station in 11a mode with 5GHz, the speed is about
200~300kbps.
how do I find my problem?
2010-03-04
发件人： Luis R. Rodriguez
发送时间： 2010-03-04 08:55:55
收件人： Pavel Roskin
抄送： [email protected]; ath9k-devel
主题： Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
> On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> >
> > Thank you for your reply.
> > But I can't config it in AP mode.
> > r...@openwrt:/# iw dev wlan0 set type ap
> > See http://wireless.kernel.org/RTFM-AP.
> >
> > and how do I config it in AP mode? (RS pro and ar9220 chipset)
>
> Use hostapd. You'll need to enable 802.11n in the hostapd configuration
> file.
Please read:
http://wireless.kernel.org/en/users/Documentation/hostapd
People who have worked hard on documentation would appreciate
if its spread.
Luis
_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
