On Tue, 2010-03-30 at 17:29 +0200, Dennis Borgmann wrote:
> # iw dev wlan1 link
> Connected to 00:0e:8e:24:52:2f (on wlan1)
> SSID: testsalat
> freq: 2462
> RX: 40496 bytes (404 packets)
> TX: 3046 bytes (38 packets)
> signal: -48 dBm
> tx bitrate: 1.0 MBit/s
I tried AR9220 on the AP side and AR9280 on the station side.
Everything worked fine with 802.11n. That's what I get on the client:
# iw dev wlan1 link
Connected to 00:26:5a:c2:4c:3d (on wlan1)
SSID: mike2
freq: 2462
RX: 111244 bytes (629 packets)
TX: 20186 bytes (176 packets)
signal: -23 dBm
tx bitrate: 117.0 MBit/s MCS 14
I'm using the current linux-wireless on both sides, so that may be the
reason. I tried channels 6 and 11. I tried no encryption and WPA2 with
CCMP.
I saw the bitrate fall to 1 Mbps if there is no traffic, but it would
immediately return to a high value once I start pinging the AP.
--
Regards,
Pavel Roskin
_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
