mohamed nasser wrote: > Hi, > > I have the tp-wn442g v.2.0 that has the AR9271 chip in it > > I tried to in install on backtrak 4 using compat-wireless-2010-05-16.tar > > and it didn't load the firmware when i reboot > > I don't know why
Load the driver with debug enabled and paste the kernel log here, and we can find out why. See: http://wireless.kernel.org/en/users/Drivers/ath9k/debug You need to enable these options in config.mk in compat-wireless and reinstall the driver. CONFIG_ATH_DEBUG=y CONFIG_ATH9K_HTC_DEBUGFS=y > Then i used the same driver on ubuntu 10.04 and it works just fine > > But, > > The bit rate is 1 MB/s and when I try to changed using > > iwconfig wlan0 bitrate 54M > > it says not supported > The reported TX rate is always 1 Mbps, because the firmware doesn't report the actual tx rate. Sujith _______________________________________________ ath9k-devel mailing list [email protected] https://lists.ath9k.org/mailman/listinfo/ath9k-devel
