RTS/CTS is turned on (as evidenced by Wireshark) and nothing that I do will
turn it off.
In hostapd.conf I have RTS/CTS turned off. Here is the setting in hostapd.conf:
# RTS/CTS threshold; 2347 = disabled (default); range 0..2347
# If this field is not included in hostapd.conf, hostapd will not
control
# RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
rts_threshold=2347
I have also tried on both stations the following 2 commands:
'sudo iwconfig wlan1 rts off'
and
'sudo iw phy phy0 set rts off'
but those commands did nothing. I have tried different versions of the ath9k
driver (upgraded to the latest) and on both of them RTS/CTS is dynamic and once
turned on it cannot be turned off??? Is there somewhere in the source code that
I need to change?
Thank you for any responses they are greatly appreciated!
Brandon M. Combs
[email protected]
mypage.iusb.edu/~brmcombs
(574)202-0972
_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
