Thanks for responding! On Thu, Sep 15, 2011 at 10:32 AM, Adrian Chadd <adr...@freebsd.org> wrote: > I think the rule is: > > * if the TPC enable bit is set, it's set in the descriptor > * else it's set in AR_PHY_POWER_* per-rate registers and the > ACK/CTS/CHIRP power register.
I just found this thread from July, http://thread.gmane.org/gmane.linux.drivers.ath9k.devel/6597/focus=6610, which is very similar to what I need to do. The difference is that while I want to do per frame power control, I need to enforce that the power level coming in through radiotap is not greater than what is dictated by the reg domain. The only other item I need to confirm is if there is any correction need for the incoming dBm value before writing it to the descriptor. Daniel _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
