I recently upgraded to compat-wireless-3.1-rc8 from 
compat-wireless-2.6.39-1-sn and have discovered an interesting behavior. 
When in monitor mode I use the signal strength field reported in 
radiotap and with 3.1 I am now getting a range of values. The more 
interesting ones are all the frames reporting a signal of 110+ dBm. To 
see what is being pulled from the descriptors I dumped rs->rs_rssi to 
klog when the value was larger than 95. Below is a snippet showing the 
ranging values,

Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.907908] [ath9k]: RSSI 107
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.911697] [ath9k]: RSSI -61
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.913553] [ath9k]: RSSI -119
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.913562] [ath9k]: RSSI -59
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.913570] [ath9k]: RSSI -94
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.915880] [ath9k]: RSSI 119
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.915890] [ath9k]: RSSI -109
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.915898] [ath9k]: RSSI 123
Nov  3 15:00:03 dpsmith-dev-system kernel: [ 5319.917743] [ath9k]: RSSI 101

A couple of data points,
  1. I have tested two different cards, one having AR9106+AR9160 and one 
with an AR9382.

  2. It appears that it is always the same devices that this occurs for, 
e.g. pretty confident there are some devices that I collected that I did 
not see anything out of the 3-10dBm range

I know 2.6.39 -> 3.1 is a bit of a jump, but I wanted to push this to 
the community to see if there are some thoughts or opinions while I dig 
deeper. My next step is to see if it occurs in 3.0 which should help 
give me a narrow set of patches to review/bisect to see at what point 
this was introduced. I would suspect it to be an initval issue, but the 
two chips I have should have different initval sets. Any thoughts or 
suggestions would be greatly appreciated.

dps

_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Reply via email to