Previous RX error checking was done exclusive-or for different error types and caused DFS pulse events to be dropped when other error flags (e.g. CRC) were set simultaneously.
This patch decouples PHY error processing from other types and ensures that all pulses detected by HW are accounted by the pattern detector. Signed-off-by: Zefir Kurtisi <[email protected]> --- drivers/net/wireless/ath/ath9k/ar9003_mac.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c index 09b8c9d..92e0042 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c @@ -530,7 +530,11 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs, */ if (rxsp->status11 & AR_CRCErr) rxs->rs_status |= ATH9K_RXERR_CRC; - else if (rxsp->status11 & AR_PHYErr) { + else if (rxsp->status11 & AR_DecryptCRCErr) + rxs->rs_status |= ATH9K_RXERR_DECRYPT; + else if (rxsp->status11 & AR_MichaelErr) + rxs->rs_status |= ATH9K_RXERR_MIC; + if (rxsp->status11 & AR_PHYErr) { phyerr = MS(rxsp->status11, AR_PHYErrCode); /* * If we reach a point here where AR_PostDelimCRCErr is @@ -552,11 +556,7 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs, rxs->rs_status |= ATH9K_RXERR_PHY; rxs->rs_phyerr = phyerr; } - - } else if (rxsp->status11 & AR_DecryptCRCErr) - rxs->rs_status |= ATH9K_RXERR_DECRYPT; - else if (rxsp->status11 & AR_MichaelErr) - rxs->rs_status |= ATH9K_RXERR_MIC; + }; } if (rxsp->status11 & AR_KeyMiss) -- 1.7.4.1 _______________________________________________ ath9k-devel mailing list [email protected] https://lists.ath9k.org/mailman/listinfo/ath9k-devel
