On Wed, Jul 4, 2012 at 12:22 AM, Ana Elisa de Campos Lobo <al...@fitec.org.br> wrote: > Daniel and Mohammed, > Thank you for your answers. > I´ve just configured UGW 5.2 to enable ATH9K into mac80211. > Although, I still have an important question: > > Which kernel version do I need to have a version of ATH9K driver that > supports chipset AR9390? I didn´t find this answer in ATH9K developer´s site > (http://linuxwireless.org/en/users/Drivers/ath9k). I understood I´ll need to > install a compatibility package in order to have the correct version of the > driver running on my board, so I need to know the correct version of ATH9K > that supports that chipset.
please try the latest compat :) http://linuxwireless.org/en/users/Download/#Where_to_download_bleeding_edge > Could you help me, please? > > Thanks and regards, > Ana > > -----Original Message----- > From: Daniel Golle [mailto:dgo...@allnet.de] > Sent: terça-feira, 3 de julho de 2012 10:52 > To: ath9k-devel@lists.ath9k.org; Ana Elisa de Campos Lobo > Subject: Re: [ath9k-devel] Connecting AR9390 to Lantiq board > > Hi Ana, > > OpenWrt doesn't use the mac80211 driver release built-into the kernel. So all > you need to do is to make sure the mac80211 package containing the ath9k > driver > is a recent enough version, and that which still work well even on Linux > 2.6.32. > > Good luck! > > > Daniel > > > On 07/03/12 16:27, Ana Elisa de Campos Lobo wrote: >> Hi all, >> >> I´m completely newbie in Linux drivers. In my project weare planning to >> connect >> an AR9390 Atheros chip on a GRX288 Lantiq board.This board has a >> softwareframework (UGW 5.2) which is based on Linux kernel 2.6.32.42 version >> and >> OpenWrt Backfire 10.03. >> >> I have some initial questions: >> >> · Does ATH9K driver support AR9390 chipset? >> >> · Which Linux kernel version is necessary to support AR9390 chipset?I >> didn´t find this chipset on the ATH9K driver site >> (_http://linuxwireless.org/en/users/Drivers/ath9k_), but according to the >> site >> AR9380 requires a Kernel version greater than 2.6.36. >> >> · Does anybody tried to connect AR9390 to a Lantiq board based on UGW >> software? >> >> Best regards, >> >> Ana >> > > > -- > ALLNET GmbH ; Maistr. 2 ; D-82110 Germering ; Germany > Tel. +49-89-89422222 - Fax +49-89-89422233 > http://www.allnet.de > email: Daniel Golle <dgo...@allnet.de> > Schulungs-/Veranstaltungsprogramm: http://www.802lab.de<http://www.802lab.de/> > Geschäftsführer: Wolfgang Marcus Bauer > Handelsregister München B 95922 ; UST-ID-Nr. DE 128214294 ; > St.-Nr.117/115/00164 > WEEE-Reg.-NR. DE 13101093 > Bankverbindung: > Sparkasse Fürstenfeldbruck KTO: 2774594 ; BLZ: 70053070 > Swift-Code: BYLADEM1FFB ; IBAN: DE61700530700002774594 > > > _______________________________________________ > ath9k-devel mailing list > ath9k-devel@lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -- thanks, shafi _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
