Hi to all
I've installed a GC-WB150 wireless+bluetooth card (
http://www.gigabyte.com/microsite/306/images/wifi.html) on a linux
server running Ubuntu 12.04 kernel 3.2.0-34.
Both adapters are detected: wireless over pci (athk9 modules):
02:00.0 Network controller: Atheros Communications Inc. Device 0037 (rev 01)
and bluetooth over usb (btusb module):
Bus 002 Device 003: ID 0cf3:3008 Atheros Communications, Inc.
Wireless works good but BT devices is unable to scan and detect devices
(the bt led on the card appears off, instead wifi led blinks):
root@entest:~# hcitool scan
Scanning ...
root@entest:~#
Following some additional info:
hciconfig -a
hci0: Type: BR/EDR Bus: USB
BD Address: DC:85:DE:09:92:1A ACL MTU: 1022:8 SCO MTU: 183:5
UP RUNNING PSCAN
RX bytes:865 acl:0 sco:0 events:38 errors:0
TX bytes:894 acl:0 sco:0 commands:37 errors:0
Features: 0xff 0xfe 0x0d 0xfe 0xd8 0x7f 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF
Link mode: SLAVE ACCEPT
Name: 'entest-0'
Class: 0x6e0100
Service Classes: Networking, Rendering, Capturing, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 3.0 (0x5) Revision: 0x102
LMP Version: 4.0 (0x6) Subversion: 0x1
Manufacturer: Atheros Communications, Inc. (69)
rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Can anybody help me please?
Thank you very much
Sergio Sagliocco
_______________________________________________
ath9k-devel mailing list
[email protected]
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
