Hi all, there is some kind of regression with setting transmit power, hardware
is warious
ar9280 cards, all work as sould with compat-wireless-3.6 and compat-drivers-2013-02-13, i
have modified regulatory database:
iw reg get
country RU:
(2402 - 2494 @ 40), (24, 23)
(5030 - 5835 @ 40), (24, 23)
with compat-wireless-3.6 and compat-drivers-2013-02-13 i can change txpower in
this rules,
iw list show channels and it's power according to database rules:
Frequencies:
* 2412 MHz [1] (23.0 dBm)
* 2417 MHz [2] (23.0 dBm)
* 2422 MHz [3] (23.0 dBm)
* 2427 MHz [4] (23.0 dBm)
* 2432 MHz [5] (23.0 dBm)
* 2437 MHz [6] (23.0 dBm)
* 2442 MHz [7] (23.0 dBm)
* 2447 MHz [8] (23.0 dBm)
* 2452 MHz [9] (23.0 dBm)
* 2457 MHz [10] (23.0 dBm)
* 2462 MHz [11] (23.0 dBm)
* 2467 MHz [12] (23.0 dBm)
* 2472 MHz [13] (23.0 dBm)
* 2484 MHz [14] (23.0 dBm)
but with compat-drivers 3.7.6 and 3.8-rc7 i cannot set power level,
iw phy phy0 set txpower fixed 10/limit 10/iw dev dev0/etc give same
error - command failed: Operation not supported (-95), and iw list
give strange output like this:
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (21.0 dBm)
* 2422 MHz [3] (21.0 dBm)
* 2427 MHz [4] (21.0 dBm)
* 2432 MHz [5] (21.0 dBm)
* 2437 MHz [6] (21.0 dBm)
* 2442 MHz [7] (21.0 dBm)
* 2447 MHz [8] (21.0 dBm)
* 2452 MHz [9] (21.0 dBm)
* 2457 MHz [10] (21.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (23.0 dBm)
* 2472 MHz [13] (23.0 dBm)
* 2484 MHz [14] (23.0 dBm)
and channel levels different on different cards.
C уважением With Best Regards
Георгиевский Юрий. Georgiewskiy Yuriy
+7 4872 711666 +7 4872 711666
факс +7 4872 711143 fax +7 4872 711143
Компания ООО "Ай Ти Сервис" IT Service Ltd
http://nkoort.ru http://nkoort.ru
JID: ghh...@icf.org.ru JID: ghh...@icf.org.ru
YG129-RIPE YG129-RIPE_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
