On 25/3/2013 12:39 AM, Felix Fietkau wrote: > On 2013-03-24 5:26 PM, Pannirselvam Kanagaratnam wrote: >> Hello, >> >> My WiFi connection drops while running the AR9280 on a Freescale >> MPC8315E platform in AP mode with hostapd. I get the following error >> within 15 seconds and the WiFi connection drops. However, I do not >> observe any issues when using the AR9382. Can you let me know what could >> be causing this and if there is a workaround for this. I am using >> Compat-Wireless-3.5.4.1. > I suggest updating to a more recent version of compat-wireless - 3.5.4.1 > is quite old. > If a similar failure still occurs there, make sure you turn on > CONFIG_KALLSYMS so that the trace is not just a long list of meaningless > numbers. > > - Felix > Here are my logs with Compat 3.9-rc2 and CONFIG_KALLSYMS enabled.
ath: phy0: Failed to stop TX DMA, queues=0x004! ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000062c0 ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ Badness at /build/compat-wireless-3.9-rc2-2-su/drivers/net/wireless/ath/ath9k/recv.c:487 NIP: c9b72eec LR: c9b72ee0 CTR: c01bc900 REGS: c6c63e30 TRAP: 0700 Not tainted (2.6.35) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22002022 XER: 20000000 TASK = c7859360[930] 'phy0' THREAD: c6c62000 GPR00: 00000001 c6c63ee0 c7859360 0000004c 00005665 ffffffff c01b9e70 00004000 GPR08: 00000000 c9b90000 00005665 c046ad78 22002082 00000000 07ff9000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000a GPR24: 00000000 c6c66b4c c6c68030 00000000 00000000 00000000 c6c68010 c6c65740 NIP [c9b72eec] ath_stoprecv+0x13c/0x154 [ath9k] LR [c9b72ee0] ath_stoprecv+0x130/0x154 [ath9k] Call Trace: [c6c63ee0] [c9b72ee0] ath_stoprecv+0x130/0x154 [ath9k] (unreliable) [c6c63f10] [c9b6ec20] ath_prepare_reset+0x54/0x90 [ath9k] [c6c63f30] [c9b6ee90] ath_reset_internal+0x6c/0x220 [ath9k] [c6c63f60] [c9b6f948] ath_reset+0x28/0x9c [ath9k] [c6c63f80] [c0039398] worker_thread+0x108/0x1b0 [c6c63fc0] [c003d338] kthread+0x78/0x7c [c6c63ff0] [c0010f08] kernel_thread+0x4c/0x68 Instruction dump: 2f800000 419eff74 809f0888 3c60c9b8 3ca0c9b8 38637194 38a572c8 38840020 4bec2125 3d20c9b9 88099475 68000001 <0f000000> 2f800000 419eff40 38000001 ath: phy0: Failed to stop TX DMA, queues=0x004! ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006040 ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up Regards, Pannir _______________________________________________ ath9k-devel mailing list [email protected] https://lists.ath9k.org/mailman/listinfo/ath9k-devel
