Not really sure what the issue is. I saw this '[  133.419432] cfg80211:
Calling CRDA for country: KR' and thought maybe the domain is not right. I
tried iw reg set US, but I am still having the issue. Strange thing is this
used to not be a problem, and now it's happening all the time and I can't
use the net.

[    8.319630] ath: phy0: ASPM enabled: 0x43
[    8.319633] ath: EEPROM regdomain: 0x65
[    8.319634] ath: EEPROM indicates we should expect a direct regpair map
[    8.319636] ath: Country alpha2 being used: 00
[    8.319636] ath: Regpair used: 0x65
[    8.378928] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.379194] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90005ba0000,
irq=18

[   70.808185] wlan0: authenticate with 00:1e:31:c3:19:e5
[   70.836295] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
[   71.037709] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
[   71.046739] wlan0: authenticated
[   71.046883] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[   71.046888] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[   71.047698] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[   71.052519] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[   71.052755] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   71.052801] wlan0: associated
[  133.419432] cfg80211: Calling CRDA for country: KR
[  146.216115] wlan0: authenticate with 00:1e:31:c3:19:e5
[  146.235874] wlan0: send auth to 00:1e:31:c3:19:e5 (try 1/3)
[  146.244024] wlan0: authenticated
[  146.244101] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[  146.244104] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[  146.245802] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[  146.249356] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[  146.249646] wlan0: associated
[  235.409884] cfg80211: Calling CRDA to update world regulatory domain
[  248.206802] wlan0: authenticate with 00:1e:31:c3:19:e5
[  248.226562] wlan0: direct probe to 00:1e:31:c3:19:e5 (try 1/3)
[  248.429836] wlan0: send auth to 00:1e:31:c3:19:e5 (try 2/3)
[  248.533150] wlan0: send auth to 00:1e:31:c3:19:e5 (try 3/3)
[  248.539111] wlan0: authenticated
[  248.539192] ath9k 0000:04:00.0 wlan0: disabling HT as WMM/QoS is not
supported by the AP
[  248.539195] ath9k 0000:04:00.0 wlan0: disabling VHT as WMM/QoS is not
supported by the AP
[  248.539821] wlan0: associate with 00:1e:31:c3:19:e5 (try 1/3)
[  248.542396] wlan0: RX AssocResp from 00:1e:31:c3:19:e5 (capab=0x431
status=0 aid=1)
[  248.542617] wlan0: associated
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Reply via email to