Brandon Combs <brmcombs <at> iusb.edu> writes:

> 
> Sagar Bijwe <sag.bijwe <at> gmail.com> writes:
> > 
> > I wish to disable CCA for ath9k. Can anyone tell me how this can be 
achieved? 
> As far as I see it, modifying values of AR9280_PHY_CCA_THRESH62     
> AR9280_PHY_CCA_THRESH62_S (present in phy.h)should do. -Sagar 
> > _______________________________________________
> 
> I also need to adjust the CCA (Clear Channel Assessment)value. Does anyone 
know 
> how to increase the CCA threshold so that one can get a node to send even 
when 
> it senses an unclear channel? Here is the code segments from 
> /source/drivers/net/wireless/ath/ath9k/ar9002_phy.h which I believe I need 
to 
> adjust to increase the CCA threshold but I am not quite sure how (thanks 
for any 

Hi Brandon,
did you finally achieved to modify the noise floor? I am looking for a 
similar fix because when scanning with madwifi and ath9k, madwifi shows much 
more APs and stations because the noise floor in the ath9k wlan card is set 
to -80.
Any help or clue will be apreciated!




_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Reply via email to