Dear all, Please help if any one have encountered simillar problems or other guidance on this, Please.
The following is my set-up: Linksys Access point. Cisco 802.11g camera connected as a wifi client to Linksys. I have a development board in which i have AR9287 as the Wifi chipset associated as wifi client to linksys. The development board has Bluetooth dongle for streaming audio etc. The development board has a LCD display and I stream the video stream from camera at 640 x 480 resolution, MPEG-4, 10fps (also tried with 15, 30 fps). Software: For the Wifi client on the development board, I am using the ath9k driver with btcoex_enable=1. 2-wire coexistence. I am allowing 40% of the time for Bluetooth an 60% of the time for WiFi. The period is around 200ms. Observations: 1. The video streams are not smooth. There will be a small pause of a second or two between frames and hence we do not see smooth transitions. 2. Sometimes it looks like, the streams are bufferred and played back at a rapid pace. So, one can see like a fast forward play of video streams on the board. 3. Disabling coexistence does not have these observations. Please help. Regards Sandeep. _______________________________________________ ath9k-devel mailing list ath9k-devel@lists.ath9k.org https://lists.ath9k.org/mailman/listinfo/ath9k-devel
